Nismo RS660 2-Way LSD - $700 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

rudypoochris · 06-13-2008, 09:49 PM

For sale is a Nismo RS660 2-Way LSD that was used for one week. It is 29 spline for the "open" R200's. This unit has the aggresive ramps. I received this unit from a 240sx owner who didn't realize that the center would clunk when first being broken in or with out friction modifier added. There is a little bit of surface rust on one end, but nothing internal. The end was merely sitting in a bit of moisture. I disassembled and reassembled the unit to confirm its age and internal condition. It is top notch. The factory finish has not fully worn off any of the clutches or friction disks yet. This unit isn't even broken in. I HIGHLY advise using new bearings as this center is sold with out matching outer races and the aforementioned moisture on one side. I am asking $700, ships from Northern California.

Note the very light surface rust on the outer most edge. So light in fact that the surface of the carrier is still completely smooth with original machining pattern. Just want to inform the buyer:

Aggressive ramps ~70ftlbs breakaway:

No sheered tabs, no abuse, great condition through out. Appears almost to have not been used:

06-13-2008, 09:49 PM	#1
rudypoochris Join Date: Jan 2007 Location: Oakland Age: 37 Posts: 30 Trader Rating: (0) Feedback Score: 0 reviews	Nismo RS660 2-Way LSD - $700 For sale is a Nismo RS660 2-Way LSD that was used for one week. It is 29 spline for the "open" R200's. This unit has the aggresive ramps. I received this unit from a 240sx owner who didn't realize that the center would clunk when first being broken in or with out friction modifier added. There is a little bit of surface rust on one end, but nothing internal. The end was merely sitting in a bit of moisture. I disassembled and reassembled the unit to confirm its age and internal condition. It is top notch. The factory finish has not fully worn off any of the clutches or friction disks yet. This unit isn't even broken in. I HIGHLY advise using new bearings as this center is sold with out matching outer races and the aforementioned moisture on one side. I am asking $700, ships from Northern California. Note the very light surface rust on the outer most edge. So light in fact that the surface of the carrier is still completely smooth with original machining pattern. Just want to inform the buyer: Aggressive ramps ~70ftlbs breakaway: No sheered tabs, no abuse, great condition through out. Appears almost to have not been used: