PA FS: Garrett t3/t67 turbo - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

claymans13 · 10-30-2008, 06:21 PM

Decided to go a different direction with my setup and the t67 isn't in the plans. The turbo is freshly rebuilt by Full Race, there is absolutely ZERO shaft play on it also. Asking 700+shipping, price is pretty firm, this turbo goes for about 1k new. PM me with any questions you have.

Compressor Specifications:
-T04R 67mm compressor wheel with a max flow rate of 75 lb/min
-0.70AR T04S compressor housing
-Good to 650whp
-4in inlet

Turbine Specifications:
-stage 5 turbine wheel
-0.63 turbine housing
-4 bolt standard turbine discharge

CHRA Specifications:
-360 degree thrust bearing standard.
-Oil cooled&lubricated center section.

10-30-2008, 06:21 PM	#1
claymans13 Zilvia Member Join Date: Apr 2008 Location: pittsburgh Age: 43 Posts: 162 Trader Rating: (9) Feedback Score: 9 reviews	FS: Garrett t3/t67 turbo Decided to go a different direction with my setup and the t67 isn't in the plans. The turbo is freshly rebuilt by Full Race, there is absolutely ZERO shaft play on it also. Asking 700+shipping, price is pretty firm, this turbo goes for about 1k new. PM me with any questions you have. Compressor Specifications: -T04R 67mm compressor wheel with a max flow rate of 75 lb/min -0.70AR T04S compressor housing -Good to 650whp -4in inlet Turbine Specifications: -stage 5 turbine wheel -0.63 turbine housing -4 bolt standard turbine discharge CHRA Specifications: -360 degree thrust bearing standard. -Oil cooled&lubricated center section.