auto five speed swap question - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

unlegendary · 06-21-2009, 07:31 PM

car: 98 s14
ecu used: manual j6 from a 97 s14
unplugged transmission control unit

okay i keep getting a cel 1-11 inhibitor switch (automatic stuff) after i was done

the only thing plugged is this top connector on the rear side of the passenger fuse box and it's jumped to make the car start. the bottom 3 connectors after that have been unplugged. reference picture (not mine) http://www.ka24development.com/cwilf...connectors.jpg

the only thing i can think of is i got the power/signal wire mixed up for the neutral switch during my hardwiring to the ecu because i looked up a fsm and cel 1-11 also means p0705 (neutral position switch).

any tips?

06-21-2009, 07:31 PM	#1
unlegendary Zilvia Addict Join Date: Apr 2007 Location: with my parents Posts: 625 Trader Rating: (1) Feedback Score: 1 reviews	auto five speed swap question car: 98 s14 ecu used: manual j6 from a 97 s14 unplugged transmission control unit okay i keep getting a cel 1-11 inhibitor switch (automatic stuff) after i was done the only thing plugged is this top connector on the rear side of the passenger fuse box and it's jumped to make the car start. the bottom 3 connectors after that have been unplugged. reference picture (not mine) http://www.ka24development.com/cwilf...connectors.jpg the only thing i can think of is i got the power/signal wire mixed up for the neutral switch during my hardwiring to the ecu because i looked up a fsm and cel 1-11 also means p0705 (neutral position switch). any tips? __________________ Full Time Student for Life