CA FS: Genuine Trust/GReddy TD04H-19T turbos - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

SinGarage · 01-09-2010, 03:05 AM

I have a pair of Trust/GReddy TD04H-19T's with the T25/T28 turbine housing footprint that I had bought to use for a custom RB application. My plans have since changed, and funds don't permit me to finish it in my original intended configuration. These have the 19T compressor, which is the largest wheel of the TD04 family, and will flow over 500cfm...sufficient to support 300+ RWHP with the 8.5cm turbine housing. The nice thing about these turbos is they use the T25/T28 footprint and discharge, IT DOES NOT FIT THE SR20 WITHOUT ADAPTER FLANGE FOR DOWNPIPE. The stock SR20 downpipe is slightly smaller and will need to have a special flange made. But this turbo has more power potential and it is a superior design (25 psi capable). Also, they would be great for a KA24 conversion or a CA18 upgrade.

I had bought these from Japan a while back, when it was around ¥119/$1 USD. I got a pretty good deal at $800 USD each. The retail cost is ¥130,000 and today the exchange rate is at ¥92.6/$1 USD...that's over $1400.00 USD each!!!

You can see this at the link below...

Code:

http://www.trust-power.com/02turbo/turbo_charger.html

I want these gone

$450 each

01-09-2010, 03:05 AM	#1
SinGarage Zilvia Addict Join Date: Sep 2009 Location: 818 SoCal Age: 48 Posts: 674 Trader Rating: (11) Feedback Score: 11 reviews	FS: Genuine Trust/GReddy TD04H-19T turbos I have a pair of Trust/GReddy TD04H-19T's with the T25/T28 turbine housing footprint that I had bought to use for a custom RB application. My plans have since changed, and funds don't permit me to finish it in my original intended configuration. These have the 19T compressor, which is the largest wheel of the TD04 family, and will flow over 500cfm...sufficient to support 300+ RWHP with the 8.5cm turbine housing. The nice thing about these turbos is they use the T25/T28 footprint and discharge, IT DOES NOT FIT THE SR20 WITHOUT ADAPTER FLANGE FOR DOWNPIPE. The stock SR20 downpipe is slightly smaller and will need to have a special flange made. But this turbo has more power potential and it is a superior design (25 psi capable). Also, they would be great for a KA24 conversion or a CA18 upgrade. I had bought these from Japan a while back, when it was around ¥119/$1 USD. I got a pretty good deal at $800 USD each. The retail cost is ¥130,000 and today the exchange rate is at ¥92.6/$1 USD...that's over $1400.00 USD each!!! You can see this at the link below... Code: http://www.trust-power.com/02turbo/turbo_charger.html I want these gone $450 each Last edited by SinGarage; 01-10-2010 at 11:12 PM..