CA FS - FULL KA24DE Supercharger Kit $1000 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

WagDatto · 03-02-2010, 05:12 PM

Up for sale is my supercharger kit. It includes everything minus hardware that you'll need to get your KA unique!!

Price: $1000 + shipping, or best offer!

-TWO Eaton M62 Superchargers
-One has minor scratches on the rotors, but spins freely
-One has been opened, cleaned, slightly ported, the noise reduction holes welded shut (increases whine and gives slightly better boost, apparently), bearings inspected and cleaned... exterior has been polished, cleaned and painted, and I have 8oz. (case fills with 6oz.) of brand new OEM oil
-Supercharger adapter plate with holes pre-tapped for vacuum and boost gauge
-Alternator plate with adjustable tension pulley
-Supercharger intake bracket with elbow and throttle body adapter plate with throttle body installed
-Ground down smooth and painted with high temp silver
-Two intake tubes
-One straight, goes from throttle body toward core support
-One curved, looks exactly like aftermarket intake pipes, has bungs welded on for IACV, etc
-Both have been cleaned and painted using an Ivory color, metalic rainbow flake in the clear and several clear coats over that for extra protection
-GReddy Emanage Blue ready for wiring
-Oil filter relocation kit with hoses
-KA upper intake manifold with KA fuel rail and SR20DET injectors installed
-Manifold has been polished, fuel rail looks BRAND EFFING NEW, and injector caps have been painted silver
-IACV relocation with hoses

I will likely ship this in two separate boxes, as the superchargers weigh a lot and I don't want any damages to any of the other things. Feel free to offer anything reasonable, however I AM looking for cash, no trades.

I paid $1000 for it, and since then, I've added hours of time cleaning and painting, and I'm including an extra supercharger that would be GREAT for mocking up, or copying the kit and using on an extra motor or even re-selling.

During my mock-ups, everything lines up perfectly, and is ready to bolt in. Again, I don't have the hardware on-hand, but I know it's somewhere in my garage. If I find it, I'll include everything I have, but you can easily snag a bag from Ace or any other hardware shop for just a few bucks.

Sean
916.505.81O8
[email protected]

EDIT: Pic of adapter plate for those interested.

soreballz · 03-02-2010, 05:18 PM

Awesome price. I'm super bummed that I can't swing this right now.

GLWS!

thisisthenewsic · 03-02-2010, 05:23 PM

Bump for a fellow 510 owner.
Did you ever run this one ur wagon?

How'd it fit clearance wise? I'd love this for my 510.

speedfreak90 · 03-02-2010, 05:46 PM

diggen the super charger... glws

jayrawr · 03-02-2010, 05:55 PM

damnnnnn im sooo down !

dOMEmE · 03-02-2010, 06:58 PM

Quote:

Originally Posted by jayrawr

damnnnnn im sooo down !

Jayrawr you always say your down but you never do it! LOL, if i had the cash i would have got this in a heart beat...ive been wanting to supercharge for a while now man...=[ ... well GLWS

Bushido · 03-02-2010, 08:29 PM

do you have any pics of the adapter plate?

s!lv!a · 03-02-2010, 11:27 PM

Great price for so much badass-ness.. Glws

novita1021 · 03-03-2010, 12:23 AM

why are you seeling it sean?i spoke with ya on ratsun..lol.

JDM Sil4ty · 03-03-2010, 06:05 AM

damn .. so tempting .. bump for same city ..

OneWheelinRR · 03-03-2010, 06:41 AM

This is such a good deal... IM SOOO SUPRISED ITS STILL HERE! If I didnt just spend 1500 on my turbo kit...

this would be mine yesterday!

Try ka forums.

SprockCapn · 03-03-2010, 09:22 AM

Dang, This is sweet! I have been looking for this. HMMM. how can I scrounge up the money!

WagDatto · 03-03-2010, 09:28 AM

Bump #1

I'll do $900 picked up just to save me the hassle of shipping it. Might be worth it to make a long drive some weekend to save yourself some money!!

keistyle · 03-03-2010, 10:26 AM

I know hamburg wanted to supercharge his car.

eclipse_dsm · 03-03-2010, 12:39 PM

Got any pics of the kit mocked up?

keiglo · 03-03-2010, 02:25 PM

if you can do this for SOHC, ill pick one up right away!

thisisthenewsic · 03-03-2010, 02:47 PM

^^
you would need to make a custom intake manifold because this is made to mate to the dohc upper intake manifold.

ihatesmog · 03-03-2010, 03:27 PM

PM'd and called, local w/ cash. LMK!

WagDatto · 03-03-2010, 05:43 PM

Bump #2

All serious PM's responded to.

Thanks everybody for your interest and kind comments! I did not MAKE this kit, it was a copy of the Thomas Knight kit that's offered, and this whole bundle is being sold WAY below the Thomas Knight brackets anyway! For comparison, TK sells the adapter plate, intake flange and alternator tensioner for $1500, to my knowledge. I'm including manifold, two blowers, all brackets, injectors, oil filter relocation, IACV relocation and tuning hardware...

I will NOT be modifying anything for a single cam. Making it work with what I'm including shouldn't be TOO hard if you picked it up, but I don't have the time or the inclination to purchase a single cam anyway...

Call, text, PM, post or email with any questions or offers!

Sean
916.505.81O8
[email protected]

Nezahualcoyotl · 03-03-2010, 11:17 PM

wow man i want so much... but no money
do you need a kidney by chance? GLWS

WagDatto · 03-04-2010, 01:02 AM

SOLD, SOLD, SOLD

To a local cat!

Thanks everyone for the love and interest, sorry to those who wanted it... The whole setup weighs over 100lbs, so shipping it would have cost a fortune and been a pain in the ass.

ihatesmog, hope to see and hear it running soon!

03-02-2010, 05:55 PM	#5
jayrawr Zilvia FREAK! Join Date: Nov 2007 Location: 56Deuce Age: 37 Posts: 1,141 Trader Rating: (14) Feedback Score: 14 reviews	damnnnnn im sooo down ! __________________

03-02-2010, 08:29 PM	#7
Bushido Post Whore! Join Date: Jun 2003 Location: SFL Posts: 3,563 Trader Rating: (10) Feedback Score: 10 reviews	do you have any pics of the adapter plate? __________________

03-03-2010, 12:23 AM	#9
novita1021 Zilvia FREAK! Join Date: Feb 2009 Location: los angeles Age: 35 Posts: 1,009 Trader Rating: (34) Feedback Score: 34 reviews	why are you seeling it sean?i spoke with ya on ratsun..lol. __________________

03-03-2010, 06:05 AM	#10
JDM Sil4ty Zilvia Addict Join Date: Sep 2009 Location: City of Trees; Cali Posts: 722 Trader Rating: (11) Feedback Score: 11 reviews	damn .. so tempting .. bump for same city .. __________________ alpha kenny body.

03-03-2010, 09:28 AM	#13
WagDatto Zilvia FREAK! Join Date: Nov 2007 Location: Sacramento, NorCal Posts: 1,283 Trader Rating: (6) Rides Gallery: WagDatto Feedback Score: 6 reviews	Bump #1 I'll do $900 picked up just to save me the hassle of shipping it. Might be worth it to make a long drive some weekend to save yourself some money!! __________________ http://garagezoku.blogspot.com

03-02-2010, 05:12 PM	#1
WagDatto Zilvia FREAK! Join Date: Nov 2007 Location: Sacramento, NorCal Posts: 1,283 Trader Rating: (6) Rides Gallery: WagDatto Feedback Score: 6 reviews	FS - FULL KA24DE Supercharger Kit $1000 Up for sale is my supercharger kit. It includes everything minus hardware that you'll need to get your KA unique!! Price: $1000 + shipping, or best offer! -TWO Eaton M62 Superchargers -One has minor scratches on the rotors, but spins freely -One has been opened, cleaned, slightly ported, the noise reduction holes welded shut (increases whine and gives slightly better boost, apparently), bearings inspected and cleaned... exterior has been polished, cleaned and painted, and I have 8oz. (case fills with 6oz.) of brand new OEM oil -Supercharger adapter plate with holes pre-tapped for vacuum and boost gauge -Alternator plate with adjustable tension pulley -Supercharger intake bracket with elbow and throttle body adapter plate with throttle body installed -Ground down smooth and painted with high temp silver -Two intake tubes -One straight, goes from throttle body toward core support -One curved, looks exactly like aftermarket intake pipes, has bungs welded on for IACV, etc -Both have been cleaned and painted using an Ivory color, metalic rainbow flake in the clear and several clear coats over that for extra protection -GReddy Emanage Blue ready for wiring -Oil filter relocation kit with hoses -KA upper intake manifold with KA fuel rail and SR20DET injectors installed -Manifold has been polished, fuel rail looks BRAND EFFING NEW, and injector caps have been painted silver -IACV relocation with hoses I will likely ship this in two separate boxes, as the superchargers weigh a lot and I don't want any damages to any of the other things. Feel free to offer anything reasonable, however I AM looking for cash, no trades. I paid $1000 for it, and since then, I've added hours of time cleaning and painting, and I'm including an extra supercharger that would be GREAT for mocking up, or copying the kit and using on an extra motor or even re-selling. During my mock-ups, everything lines up perfectly, and is ready to bolt in. Again, I don't have the hardware on-hand, but I know it's somewhere in my garage. If I find it, I'll include everything I have, but you can easily snag a bag from Ace or any other hardware shop for just a few bucks. Sean 916.505.81O8 [email protected] EDIT: Pic of adapter plate for those interested. __________________ http://garagezoku.blogspot.com Last edited by WagDatto; 03-02-2010 at 11:39 PM..

03-02-2010, 05:23 PM	#3
thisisthenewsic Zilvia Member Join Date: Jul 2009 Location: murrieta Age: 35 Posts: 256 Trader Rating: (8) Feedback Score: 8 reviews	Bump for a fellow 510 owner. Did you ever run this one ur wagon? How'd it fit clearance wise? I'd love this for my 510.

03-02-2010, 05:46 PM	#4
speedfreak90 Zilvia Junkie Join Date: Aug 2009 Location: maryland Posts: 359 Trader Rating: (2) Feedback Score: 2 reviews	diggen the super charger... glws

03-02-2010, 11:27 PM	#8
s!lv!a Leaky Injector Join Date: Jan 2008 Location: South Texas Age: 37 Posts: 142 Trader Rating: (5) Feedback Score: 5 reviews	Great price for so much badass-ness.. Glws

03-03-2010, 06:41 AM	#11
OneWheelinRR Leaky Injector Join Date: Mar 2007 Location: Las Vegas, NV Age: 40 Posts: 137 Trader Rating: (1) Feedback Score: 1 reviews	This is such a good deal... IM SOOO SUPRISED ITS STILL HERE! If I didnt just spend 1500 on my turbo kit... this would be mine yesterday! Try ka forums.

03-03-2010, 09:22 AM	#12
SprockCapn Join Date: May 2008 Location: Billings, MT Posts: 7 Trader Rating: (0) Feedback Score: 0 reviews	Dang, This is sweet! I have been looking for this. HMMM. how can I scrounge up the money!

03-03-2010, 10:26 AM	#14
keistyle Zilvia FREAK! Join Date: Aug 2007 Location: rancho cucamonga, ca Age: 34 Posts: 1,580 Trader Rating: (20) Feedback Score: 20 reviews	I know hamburg wanted to supercharge his car. __________________ Tacoheroi.com

03-03-2010, 12:39 PM	#15
eclipse_dsm Zilvia Junkie Join Date: Jun 2005 Location: DriftHeaven Posts: 411 Trader Rating: (3) Feedback Score: 3 reviews	Got any pics of the kit mocked up?

03-03-2010, 02:25 PM	#16
keiglo Leaky Injector Join Date: Mar 2009 Location: Chino Hills Age: 33 Posts: 133 Trader Rating: (0) Feedback Score: 0 reviews	if you can do this for SOHC, ill pick one up right away!

03-03-2010, 02:47 PM	#17
thisisthenewsic Zilvia Member Join Date: Jul 2009 Location: murrieta Age: 35 Posts: 256 Trader Rating: (8) Feedback Score: 8 reviews	^^ you would need to make a custom intake manifold because this is made to mate to the dohc upper intake manifold.

03-03-2010, 03:27 PM	#18
ihatesmog Join Date: Jul 2008 Location: NorCal Age: 43 Posts: 39 Trader Rating: (0) Feedback Score: 0 reviews	PM'd and called, local w/ cash. LMK!

03-03-2010, 05:43 PM	#19
WagDatto Zilvia FREAK! Join Date: Nov 2007 Location: Sacramento, NorCal Posts: 1,283 Trader Rating: (6) Rides Gallery: WagDatto Feedback Score: 6 reviews	Bump #2 All serious PM's responded to. Thanks everybody for your interest and kind comments! I did not MAKE this kit, it was a copy of the Thomas Knight kit that's offered, and this whole bundle is being sold WAY below the Thomas Knight brackets anyway! For comparison, TK sells the adapter plate, intake flange and alternator tensioner for $1500, to my knowledge. I'm including manifold, two blowers, all brackets, injectors, oil filter relocation, IACV relocation and tuning hardware... I will NOT be modifying anything for a single cam. Making it work with what I'm including shouldn't be TOO hard if you picked it up, but I don't have the time or the inclination to purchase a single cam anyway... Call, text, PM, post or email with any questions or offers! Sean 916.505.81O8 [email protected] __________________ http://garagezoku.blogspot.com

03-03-2010, 11:17 PM	#20
Nezahualcoyotl Zilvia Addict Join Date: Oct 2006 Location: Santa Ana, California Age: 38 Posts: 769 Trader Rating: (16) Feedback Score: 16 reviews	wow man i want so much... but no money do you need a kidney by chance? GLWS

03-04-2010, 01:02 AM	#21
WagDatto Zilvia FREAK! Join Date: Nov 2007 Location: Sacramento, NorCal Posts: 1,283 Trader Rating: (6) Rides Gallery: WagDatto Feedback Score: 6 reviews	SOLD, SOLD, SOLD To a local cat! Thanks everyone for the love and interest, sorry to those who wanted it... The whole setup weighs over 100lbs, so shipping it would have cost a fortune and been a pain in the ass. ihatesmog, hope to see and hear it running soon! __________________ http://garagezoku.blogspot.com