SR20 NA ecu F27 connector question - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

EndlessApex · 06-20-2010, 06:58 PM

Hello,
I'm trying to finish the wiring for an s14 sr20 with the NA ecu into an s13 and man I wish I knew I wouldn't be able to get a reliable ecu pinout before I cut up the harness, I would have labeled every wire. I only have a few wires left I'm not sure about and one of them is the YELLOW wire #8 on the f27 connector (large grey plug at back of intake manifold). The FSM for s14 or s15 doesn't seem to show what this wire is for, and I don't have a spare yellow from the ecu. I'm confused and pulling my hair out trying to find a proper diagram. Any help would be appreciated.

06-20-2010, 06:58 PM	#1
EndlessApex Join Date: May 2010 Location: South Florida Age: 36 Posts: 2 Trader Rating: (0) Feedback Score: 0 reviews	SR20 NA ecu F27 connector question Hello, I'm trying to finish the wiring for an s14 sr20 with the NA ecu into an s13 and man I wish I knew I wouldn't be able to get a reliable ecu pinout before I cut up the harness, I would have labeled every wire. I only have a few wires left I'm not sure about and one of them is the YELLOW wire #8 on the f27 connector (large grey plug at back of intake manifold). The FSM for s14 or s15 doesn't seem to show what this wire is for, and I don't have a spare yellow from the ecu. I'm confused and pulling my hair out trying to find a proper diagram. Any help would be appreciated.