suspension torque specs

[dori2 s13coupe]

hey guys i found a post for my question but this is the problem i ran into... i was wondering if his specs are in a different unit....
Front Suspension:
Two bolts that hold the strut to the spindle : 84-98 ft-lb
Three nuts on top of the strut that hold it in place : 29-40 ft-lb
Rear Suspension:
Two nuts on top of the strut that hold it to the car: 12-14 ft-lb
Nut that holds the strut to the spindle: 65-80 ft-lb

for the bolts that hold the struts to the spindle.. i torqued it down to 250 not sure what unit... and as for the bolts that hold the strut to the car i torqued it to 200 it had 2 units on eachside of the needle... one side went up to 350? one side went up to about 100 IIRC

is there something wrong i did? overtightening it?

help me out please