CA Built KA24DE Full Swap - $2500 - ARP, Supertech, Eagle - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

*StryfeS13* · 08-17-2011, 04:29 PM

MOTOR IS OUT OF THE CAR AND READY TO BE PICKED UP!!!
$2500!
Located in Fresno, CA

Video:
KA24DE FOR SALE on Vimeo

Comes with EVERYTHING. Yes, everything.

- Motor
- Tranny (no grinds, or anything)
- Driveshaft
- Harness
- ECU
- ETC

Motor is built with the following: (I have receipts, this is LEGIT)

- LESS THAN 20K. Just built it last year
- Compression is 165 across the board
- Supertech 8.6:1 Forged pistons
- Supertech rings, FILE FIT
- Eagle forged rods
- Machine work to block and head, resurfaced to 50RA, bored .020" over
- Head is ported/polished, intake mani is port matched to head
- NO EMISSIONS
- Brand new injector OEM o-rings
- New main/rod bearings
- ARP Rod bolts
- ARP Head studs
- ARP Main studs
- Intake manifold spacer
- All new timing components, gaskets, etc
- NEW OEM oil pump
- Oil pan already tapped with -10AN for turbo drain
- New viton valve seals
- Exedy clutch
- New throw out bearing
- NO notorious KA valve tick. NONE!

THE ONLY THING WRONG WITH THIS MOTOR IS THE PAINT IS CHIPPING OFF THE BLOCK. Lol

Onto the pics:

File fitted rings for turbo:

Block:

Ported head:

*StryfeS13* · 08-18-2011, 04:00 PM

Hello, is anyone alive? Still for sale.

JasianBlazin · 08-18-2011, 04:18 PM

bump! wish i had moneys.

YellowFox · 08-18-2011, 06:03 PM

If only you were closer.. GLWS

Jasonx63 · 08-19-2011, 01:40 AM

bump

awesome motor

*StryfeS13* · 08-19-2011, 05:58 PM

Anyone need this!? $2200 picked UP. Good deal right here!

*StryfeS13* · 08-20-2011, 03:12 PM

Last and final bump.

*StryfeS13* · 08-21-2011, 10:39 PM

MOTOR IS OUT OF THE CAR AND READY TO BE PICKED UP!!!
$2200 - and that's FIRM!
Located in Fresno, CA

Video:
KA24DE FOR SALE on Vimeo

Comes with EVERYTHING. Yes, everything.

- Motor
- Tranny (no grinds, or anything)
- Radiator
- MAF
- Driveshaft
- Harness
- ECU
- ETC

Motor is built with the following: (I have receipts, this is LEGIT)

- LESS THAN 20K. Just built it last year
- Compression is 165 across the board
- Supertech 8.6:1 Forged pistons
- Supertech rings, FILE FIT
- Eagle forged rods
- Machine work to block and head, resurfaced to 50RA, bored .020" over
- Head is ported/polished, intake mani is port matched to head
- NO EMISSIONS
- Brand new injector OEM o-rings
- New main/rod bearings
- ARP Rod bolts
- ARP Head studs
- ARP Main studs
- Intake manifold spacer
- All new timing components, gaskets, etc
- NEW OEM oil pump
- Oil pan already tapped with -10AN for turbo drain
- New viton valve seals
- Exedy clutch
- New throw out bearing
- NO notorious KA valve tick. NONE!

THE ONLY THING WRONG WITH THIS MOTOR IS THE PAINT IS CHIPPING OFF THE BLOCK. Lol

Onto the pics:

File fitted rings for turbo:

Block:

Ported head:

warauto · 08-21-2011, 10:59 PM

Seems like a good platform for boosting, GLWS

Jasonx63 · 08-22-2011, 03:01 AM

Bump
good motor hell of a deal. very well built.

*StryfeS13* · 08-22-2011, 03:51 PM

Bumping this to the top.
Built motor, good for boost!

*racerx2k1* · 08-22-2011, 04:49 PM

Quote:

Originally Posted by StryfeS13

Hello, is anyone alive? Still for sale.

Quote:

Originally Posted by Jasonx63

bump

awesome motor

Quote:

Originally Posted by StryfeS13

Last and final bump.

Quote:

Originally Posted by Jasonx63

Bump
good motor hell of a deal. very well built.

Quote:

Originally Posted by StryfeS13

Bumping this to the top.
Built motor, good for boost!

2 bump limit. You can start new thread in 3 days.

Quote:

Originally Posted by S13SilviaGirl

Do not get your buddies to bump it for you either, again it will be locked.

08-17-2011, 04:29 PM	#1
StryfeS13 It's Always Broken. Join Date: Feb 2010 Location: Fresno, CA Posts: 1,363 Trader Rating: (14) Feedback Score: 14 reviews	Built KA24DE Full Swap - $2500 - ARP, Supertech, Eagle MOTOR IS OUT OF THE CAR AND READY TO BE PICKED UP!!! $2500! Located in Fresno, CA Video: KA24DE FOR SALE on Vimeo Comes with EVERYTHING. Yes, everything. - Motor - Tranny (no grinds, or anything) - Driveshaft - Harness - ECU - ETC Motor is built with the following: (I have receipts, this is LEGIT) - LESS THAN 20K. Just built it last year - Compression is 165 across the board - Supertech 8.6:1 Forged pistons - Supertech rings, FILE FIT - Eagle forged rods - Machine work to block and head, resurfaced to 50RA, bored .020" over - Head is ported/polished, intake mani is port matched to head - NO EMISSIONS - Brand new injector OEM o-rings - New main/rod bearings - ARP Rod bolts - ARP Head studs - ARP Main studs - Intake manifold spacer - All new timing components, gaskets, etc - NEW OEM oil pump - Oil pan already tapped with -10AN for turbo drain - New viton valve seals - Exedy clutch - New throw out bearing - NO notorious KA valve tick. NONE! *THE ONLY THING WRONG WITH THIS MOTOR IS THE PAINT IS CHIPPING OFF THE BLOCK. Lol* Onto the pics: File fitted rings for turbo: Block: Ported head:

08-21-2011, 10:39 PM	#8
StryfeS13 It's Always Broken. Join Date: Feb 2010 Location: Fresno, CA Posts: 1,363 Trader Rating: (14) Feedback Score: 14 reviews	Built KA24DE full swap, legit!! $2200 FIRM MOTOR IS OUT OF THE CAR AND READY TO BE PICKED UP!!! $2200 - and that's FIRM! Located in Fresno, CA Video: KA24DE FOR SALE on Vimeo Comes with EVERYTHING. Yes, everything. - Motor - Tranny (no grinds, or anything) - Radiator - MAF - Driveshaft - Harness - ECU - ETC Motor is built with the following: (I have receipts, this is LEGIT) - LESS THAN 20K. Just built it last year - Compression is 165 across the board - Supertech 8.6:1 Forged pistons - Supertech rings, FILE FIT - Eagle forged rods - Machine work to block and head, resurfaced to 50RA, bored .020" over - Head is ported/polished, intake mani is port matched to head - NO EMISSIONS - Brand new injector OEM o-rings - New main/rod bearings - ARP Rod bolts - ARP Head studs - ARP Main studs - Intake manifold spacer - All new timing components, gaskets, etc - NEW OEM oil pump - Oil pan already tapped with -10AN for turbo drain - New viton valve seals - Exedy clutch - New throw out bearing - NO notorious KA valve tick. NONE! *THE ONLY THING WRONG WITH THIS MOTOR IS THE PAINT IS CHIPPING OFF THE BLOCK. Lol* Onto the pics: File fitted rings for turbo: Block: Ported head:

08-18-2011, 04:00 PM	#2
StryfeS13 It's Always Broken. Join Date: Feb 2010 Location: Fresno, CA Posts: 1,363 Trader Rating: (14) Feedback Score: 14 reviews	Hello, is anyone alive? Still for sale.

08-18-2011, 04:18 PM	#3
JasianBlazin Zilvia Addict Join Date: Oct 2010 Location: Central California Posts: 941 Trader Rating: (24) Feedback Score: 24 reviews	bump! wish i had moneys.

08-18-2011, 06:03 PM	#4
YellowFox Leaky Injector Join Date: Dec 2007 Location: Overland Park, KS Age: 34 Posts: 107 Trader Rating: (1) Feedback Score: 1 reviews	If only you were closer.. GLWS

08-19-2011, 01:40 AM	#5
Jasonx63 Zilvia Member Join Date: Aug 2010 Location: Fresno Age: 34 Posts: 225 Trader Rating: (2) Feedback Score: 2 reviews	bump awesome motor

08-19-2011, 05:58 PM	#6
StryfeS13 It's Always Broken. Join Date: Feb 2010 Location: Fresno, CA Posts: 1,363 Trader Rating: (14) Feedback Score: 14 reviews	Anyone need this!? $2200 picked UP. Good deal right here!

08-20-2011, 03:12 PM	#7
StryfeS13 It's Always Broken. Join Date: Feb 2010 Location: Fresno, CA Posts: 1,363 Trader Rating: (14) Feedback Score: 14 reviews	Last and final bump.

08-21-2011, 10:59 PM	#9
warauto Zilvia Addict Join Date: Oct 2007 Location: GA Posts: 633 Trader Rating: (3) Feedback Score: 3 reviews	Seems like a good platform for boosting, GLWS

08-22-2011, 03:01 AM	#10
Jasonx63 Zilvia Member Join Date: Aug 2010 Location: Fresno Age: 34 Posts: 225 Trader Rating: (2) Feedback Score: 2 reviews	Bump good motor hell of a deal. very well built.

08-22-2011, 03:51 PM	#11
StryfeS13 It's Always Broken. Join Date: Feb 2010 Location: Fresno, CA Posts: 1,363 Trader Rating: (14) Feedback Score: 14 reviews	Bumping this to the top. Built motor, good for boost!