CA 240sx s13 silvia and 350Z parts - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

blackdragon328 · 09-14-2011, 02:46 PM

Located in Santa barbara CA (all parts located there). I drive to LA often in a small car so I can possibly meet a buyer up somewhere between santa barbara and LA.

Cleaning out my garage and I gotta get rid of some parts that I've had stashed away for a project that never panned out. all prices are OBO but dont throw me lame offers please.

s14 fiberglass body kit - $200

S13 coupe (silvia) widebody kit without front fenders -$275 (NO SHIPPING)
-front bumper
-rear bumper
-side skirts
-rear overfenders (50mm)

350Z mahle 8:1 pistons (vq35de) - SOLD

350Z eagle H-beam rods (vq35de) - SOLD

350z VQ35DE and transmission -$375 (NO SHIPPING)
-needs rebuild after a spun bearing
-modified throttle for 240sx cable throttle
-lightened alternator & water pulley
-comes with transmission

240sx vq35de conversion headers -$200 +shipping (the reason for that weird bend in the header below is to clear the steering column).

S14 stock seats - $150 (NO SHIPPING)

240sx VQ35DE conversion driveshaft -$250 +shipping

s13 coupe taillights - $60 +shipping (both)

350Z lightweight pulley (silver): -$50 shipped

R32 taillights (blue) only interested in trades for something else

I just swapped out my hubs to 5 lug and I'm going to sell my 5zigen FN01RC - $450 (id rather sell these locally)
they are 4x114.5 and are running 225s on em on a +35 offset.
I have some neo-gens on em , the rears are at 20% or so the fronts are at around 30-40%

New item:

tomei solid lifters for an sr20det (comes with shims that worked on my SR). - $150 + shipping
- 2k miles on them
- reason for removal: I went with some VVL heads so I dont need these anymore.

BC valve springs and retainers - $150 + shipping
- 2k miles on them
- reason for removal: I went with some VVL heads so I dont need these anymore.

T28 turbo with all oil and water lines, the intake hard pipes that comes off the turbo as well as the tip that comes off the intake side after the turbine (I have no idea what either of those hard lines are called). no shaft play, no problems, taken off of my sr20det since we are going to upgrade to a gtx3076. I was running it at 12psi boost. asking $350

thanks for looking

PFC Muckenhirn, USMC

09-14-2011, 02:46 PM	#1
blackdragon328 Zilvia Junkie Join Date: Sep 2007 Location: Santa Barbara, 805 Age: 37 Posts: 314 Trader Rating: (7) Feedback Score: 7 reviews	240sx s13 silvia and 350Z parts Located in Santa barbara CA (all parts located there). I drive to LA often in a small car so I can possibly meet a buyer up somewhere between santa barbara and LA. Cleaning out my garage and I gotta get rid of some parts that I've had stashed away for a project that never panned out. all prices are OBO but dont throw me lame offers please. s14 fiberglass body kit - $200 S13 coupe (silvia) widebody kit without front fenders -$275 (NO SHIPPING) -front bumper -rear bumper -side skirts -rear overfenders (50mm) 350Z mahle 8:1 pistons (vq35de) - SOLD 350Z eagle H-beam rods (vq35de) - SOLD 350z VQ35DE and transmission -$375 (NO SHIPPING) -needs rebuild after a spun bearing -modified throttle for 240sx cable throttle -lightened alternator & water pulley -comes with transmission 240sx vq35de conversion headers -$200 +shipping (the reason for that weird bend in the header below is to clear the steering column). S14 stock seats - $150 (NO SHIPPING) 240sx VQ35DE conversion driveshaft -$250 +shipping s13 coupe taillights - $60 +shipping (both) 350Z lightweight pulley (silver): -$50 shipped R32 taillights (blue) only interested in trades for something else I just swapped out my hubs to 5 lug and I'm going to sell my 5zigen FN01RC - $450 (id rather sell these locally) they are 4x114.5 and are running 225s on em on a +35 offset. I have some neo-gens on em , the rears are at 20% or so the fronts are at around 30-40% New item: tomei solid lifters for an sr20det (comes with shims that worked on my SR). - $150 + shipping - 2k miles on them - reason for removal: I went with some VVL heads so I dont need these anymore. BC valve springs and retainers - $150 + shipping - 2k miles on them - reason for removal: I went with some VVL heads so I dont need these anymore. T28 turbo with all oil and water lines, the intake hard pipes that comes off the turbo as well as the tip that comes off the intake side after the turbine (I have no idea what either of those hard lines are called). no shaft play, no problems, taken off of my sr20det since we are going to upgrade to a gtx3076. I was running it at 12psi boost. asking $350 thanks for looking PFC Muckenhirn, USMC Last edited by blackdragon328; 11-10-2011 at 07:54 PM..