AZ FS: RB25, S14, S13, 350z stuff - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Nimso · 10-28-2011, 10:43 PM

I need to clear my garage out and don't need this stuff, so its for sale.

RB25 stock flywheel ( 18/19 lbs) *i have the crap ebay clutch that was mated to the flywheel, if it fits in the box with the flywheel, then i

will include it, if not then im throwing it in the trash.

$100 + shipping

350z Fairlady Z LED Tail lights. I bought these for 500 from nissan. They are REAL JDM tails, not the fake altezza ones. They have around 5k

miles on them . All of the LED's work and I am selling them because I sold my Z and put the stockies back on. They are in perfect shape, no

broken tabs.

350 + shipping for these. They sell for 479 + shipping on courtesy parts.

Pics of them on my Z when I had it.

350z front reflectors. I put the fairlady z smoked ones on the car, and had these stock ones left over. If you buy the tails, u can just have

these.

S13 stock koyo replacement radiator. Bought this because I needed a thinner radiator for my rb (to use a clutch fan) because my koyo was too

thick. (ended up buying an rb26 radiator) so i dont need this, never used it, but it does hold water/no leaks.

$75 + shipping

RB25 T3 Exhaust manifold - never used - This was included as a part of the sale when I bought the car. It is from Japanese Race Supplies and

was bought for $725. It has good looking welds, and braces on the welds as well.

$500 obo + shipping

RB25 ACT Xtreme 6 Puck Unsprung Clutch (630 ft/lbs of torque) - So, long story short... I put this clutch in my car, pressure plate broke,

went thru a whole deal with figuring out what was wrong. Figured out it was the pressure plate, had different clutch put in, sent this into

ACT for warranty replacement , they replaced it and gave me a new clutch disc and everything. I don't need it because I already bought a new

clutch for the car. Its basically brand new as you can see from the pics, just a little dirty. This will come in the same box that ACT sent

it to me from the factory. You can even have the paper that shows that it is new/replaced under warranty.

$300 shipped - $280 picked up

Stock RB25 slave cylinder - same story as above, I replaced this because I thought it was bad. Its good and works.

$35 shipped

S14 Carbon Fiber Like (looks like Carbon Fiber) Gauge Cluster surround. - Plastic, looks like carbon fiber.

$20 or a pack of beer

S13 Clutch Pedal - Someone before me used this along with the S13 clutch pedal bracket and some lug nuts for spacers. I replaced this with

the correct S14 bracket/pedal.

$35 shipped

S13 Clutch Pedal Bracket - same story as above

$30 shipped Buy both together for $55 shipped

I also have a full rb25 into s14 motorset that I will be selling / parting out. as far as parting out, i will start making a list of what

people want. when i say full motorset, i mean everything needed to put into an s14, harness, motor, rb25 trans, ecu, full exhaust,

intercooler setup, etc... everything. the motor has bad compression on cylinders 5 and 6. when i get time to do it, i will take the head

off and inspect the cylinders to see whats going on. im assuming its the rings that went bad, but we will see.

I also have a godspeed rb25 intercooler kit, brand new in the box. i bought it and ended up not needing it, i opened the box to look at it,

but i didnt open any of the piping/etc stuff, it is still new in the box / unused. i bought this exact kit found here:

http://www.amazon.com/Godspeed-Nissa.../dp/B0040I03PA

$300 shipped

i have more stuff that i will add later.

You can call or text me at 480 335 2385 for more pics or request them on here and i will post them as soon as i can.

Nimso · 10-30-2011, 01:56 AM

bump, feel free to make offers on this stuff

docslide · 10-30-2011, 09:07 AM

Pics of the motor set and a price

dao7823 · 11-02-2011, 04:32 PM

How much for harness shipped to 90063

redline1320 · 11-04-2011, 01:12 PM

motor set price?
and will you part w/ anything from the motor set like ecu?

Nimso · 11-07-2011, 07:11 PM

sry for the really late reply, ive been busy... as for the motor, im going to be parting out everything except for the block.

the harness isnt in the best condition, the ecu plug is ripped in half (i bought the engine from someone who had a shop put the car in and i guess they did that) so i am going to find a new plug and repin it, and there are a few connectors that will need to be redone on it (it has a z32 maf plug, etc)

redline1320 · 11-08-2011, 06:02 PM

Well I just want the ecu. I dont need the harness.

10-28-2011, 10:43 PM	#1
Nimso Zilvia Member Join Date: Apr 2008 Location: Tempe, AZ Age: 40 Posts: 281 Trader Rating: (0) Feedback Score: 0 reviews	FS: RB25, S14, S13, 350z stuff I need to clear my garage out and don't need this stuff, so its for sale. RB25 stock flywheel ( 18/19 lbs) *i have the crap ebay clutch that was mated to the flywheel, if it fits in the box with the flywheel, then i will include it, if not then im throwing it in the trash. $100 + shipping 350z Fairlady Z LED Tail lights. I bought these for 500 from nissan. They are REAL JDM tails, not the fake altezza ones. They have around 5k miles on them . All of the LED's work and I am selling them because I sold my Z and put the stockies back on. They are in perfect shape, no broken tabs. 350 + shipping for these. They sell for 479 + shipping on courtesy parts. Pics of them on my Z when I had it. 350z front reflectors. I put the fairlady z smoked ones on the car, and had these stock ones left over. If you buy the tails, u can just have these. S13 stock koyo replacement radiator. Bought this because I needed a thinner radiator for my rb (to use a clutch fan) because my koyo was too thick. (ended up buying an rb26 radiator) so i dont need this, never used it, but it does hold water/no leaks. $75 + shipping RB25 T3 Exhaust manifold - never used - This was included as a part of the sale when I bought the car. It is from Japanese Race Supplies and was bought for $725. It has good looking welds, and braces on the welds as well. $500 obo + shipping RB25 ACT Xtreme 6 Puck Unsprung Clutch (630 ft/lbs of torque) - So, long story short... I put this clutch in my car, pressure plate broke, went thru a whole deal with figuring out what was wrong. Figured out it was the pressure plate, had different clutch put in, sent this into ACT for warranty replacement , they replaced it and gave me a new clutch disc and everything. I don't need it because I already bought a new clutch for the car. Its basically brand new as you can see from the pics, just a little dirty. This will come in the same box that ACT sent it to me from the factory. You can even have the paper that shows that it is new/replaced under warranty. $300 shipped - $280 picked up Stock RB25 slave cylinder - same story as above, I replaced this because I thought it was bad. Its good and works. $35 shipped S14 Carbon Fiber Like (looks like Carbon Fiber) Gauge Cluster surround. - Plastic, looks like carbon fiber. $20 or a pack of beer S13 Clutch Pedal - Someone before me used this along with the S13 clutch pedal bracket and some lug nuts for spacers. I replaced this with the correct S14 bracket/pedal. $35 shipped S13 Clutch Pedal Bracket - same story as above $30 shipped Buy both together for $55 shipped I also have a full rb25 into s14 motorset that I will be selling / parting out. as far as parting out, i will start making a list of what people want. when i say full motorset, i mean everything needed to put into an s14, harness, motor, rb25 trans, ecu, full exhaust, intercooler setup, etc... everything. the motor has bad compression on cylinders 5 and 6. when i get time to do it, i will take the head off and inspect the cylinders to see whats going on. im assuming its the rings that went bad, but we will see. I also have a godspeed rb25 intercooler kit, brand new in the box. i bought it and ended up not needing it, i opened the box to look at it, but i didnt open any of the piping/etc stuff, it is still new in the box / unused. i bought this exact kit found here: http://www.amazon.com/Godspeed-Nissa.../dp/B0040I03PA $300 shipped i have more stuff that i will add later. You can call or text me at 480 335 2385 for more pics or request them on here and i will post them as soon as i can.

11-04-2011, 01:12 PM	#5
redline1320 Zilvia Junkie Join Date: Dec 2009 Location: FL Age: 34 Posts: 315 Trader Rating: (0) Feedback Score: 0 reviews	motor set price? and will you part w/ anything from the motor set like ecu? __________________

11-08-2011, 06:02 PM	#7
redline1320 Zilvia Junkie Join Date: Dec 2009 Location: FL Age: 34 Posts: 315 Trader Rating: (0) Feedback Score: 0 reviews	Well I just want the ecu. I dont need the harness. __________________

10-30-2011, 01:56 AM	#2
Nimso Zilvia Member Join Date: Apr 2008 Location: Tempe, AZ Age: 40 Posts: 281 Trader Rating: (0) Feedback Score: 0 reviews	bump, feel free to make offers on this stuff

10-30-2011, 09:07 AM	#3
docslide Leaky Injector Join Date: Jan 2010 Location: goodyear Age: 35 Posts: 136 Trader Rating: (1) Feedback Score: 1 reviews	Pics of the motor set and a price

11-02-2011, 04:32 PM	#4
dao7823 BANNED Join Date: May 2010 Location: West Covina Posts: 26 Trader Rating: (0) Feedback Score: 0 reviews	How much for harness shipped to 90063

11-07-2011, 07:11 PM	#6
Nimso Zilvia Member Join Date: Apr 2008 Location: Tempe, AZ Age: 40 Posts: 281 Trader Rating: (0) Feedback Score: 0 reviews	sry for the really late reply, ive been busy... as for the motor, im going to be parting out everything except for the block. the harness isnt in the best condition, the ecu plug is ripped in half (i bought the engine from someone who had a shop put the car in and i guess they did that) so i am going to find a new plug and repin it, and there are a few connectors that will need to be redone on it (it has a z32 maf plug, etc)