Mazworx Main Bolts Issue - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

thurman548 · 12-10-2011, 12:04 PM

I am torqueing a set of Mazworx Main bolts to the torque spec which is 85 Ft lbs of torque (which the instructions say). I cannot turn the crank freely with by hand. I called Mazworx and they said that the changed the torque settings in the instructions down to 75 ft lbs of torque. 75 ft lbs are still a lot higher than the FSM. So I am wondering what everyone is torqueing the main bolts down to. Thanks!

12-10-2011, 12:04 PM	#1
thurman548 Leaky Injector Join Date: Jul 2005 Location: Charleston AFB, SC Posts: 116 Trader Rating: (3) Feedback Score: 3 reviews	Mazworx Main Bolts Issue I am torqueing a set of Mazworx Main bolts to the torque spec which is 85 Ft lbs of torque (which the instructions say). I cannot turn the crank freely with by hand. I called Mazworx and they said that the changed the torque settings in the instructions down to 75 ft lbs of torque. 75 ft lbs are still a lot higher than the FSM. So I am wondering what everyone is torqueing the main bolts down to. Thanks!