Removing KA checklist... - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

jacobzking · 01-31-2012, 05:34 PM

I know that most of this information is on here, at least in bits and pieces and what not, but I'm about to pull the KA out of my s14 and just want to make sure everything is unbolted and ready to go. I'll list what's unbolted, disconnected and tell me if I'm overlooking anything. Thanks in advance!

Driveshaft mount removed so the yoke can slide out easier
L & R engine mount top bolts removed
Radiator, fan shroud, fan, air intake all removed
Cat unbolted at down pipe
PS lines disconnected
Heater hose disconnected
ECU harness removed and pulled through firewall

Anything I'm overlooking?
Probably some ground wires that need to be undone?
Will the header come out with the car (clear the steering rack)?

Thanks guys! Its been about 5 years or more since I've pulled one of these... no, 7 years plus.

01-31-2012, 05:34 PM	#1
jacobzking Zilvia Member Join Date: Nov 2011 Location: Frisco, TX Age: 44 Posts: 288 Trader Rating: (3) Feedback Score: 3 reviews	Removing KA checklist... I know that most of this information is on here, at least in bits and pieces and what not, but I'm about to pull the KA out of my s14 and just want to make sure everything is unbolted and ready to go. I'll list what's unbolted, disconnected and tell me if I'm overlooking anything. Thanks in advance! Driveshaft mount removed so the yoke can slide out easier L & R engine mount top bolts removed Radiator, fan shroud, fan, air intake all removed Cat unbolted at down pipe PS lines disconnected Heater hose disconnected ECU harness removed and pulled through firewall Anything I'm overlooking? Probably some ground wires that need to be undone? Will the header come out with the car (clear the steering rack)? Thanks guys! Its been about 5 years or more since I've pulled one of these... no, 7 years plus.