CA S14 Random OE Parts (KA)

[Karlitos]

I have some stuff for sale, engine recently blew and need to make some money back.
Everything is OBO, so make offers. Things are either located in San Diego, or San Luis Obispo, can arrange for shipping or pick in any of these 2 places.

First off, I have a 5 speed transmission from a 95 s14. It WILL need a rebuild, synchros are toast.. Will sell it for $60 OBO.


Have an OEM KA flywheel, will need resurfacing, has visible heat spots. Was in use for daily for a long time. $20 OBO.


Have a used OEM KA clutch. was used for less than 500 miles. Its generic/autozone/whatevers clutch. Pressure plate and disk- $60 OBO.


OEM s14 Zenki rear bumper. 95 Color only concord grey. Rear bumper shell (no foam) $20 OBO.


Sony 1000w amp model XM-GTX1852, worked great just didnt use it anymore. Its about a year old purchased refurbished from a sony outlet. $40


Also have Zenki taillights, just the corner lights. Driverside has a crack on it but it doesnt let water in. $20


1 KA trans shifters. I think it's Ebay short shifter with a missing bushing (can get from FRSport). Comes with plate. $10


1 SPAL 12" Electric fan with pigtail. Worked well, part no. 30102029. $120

2 5x114.3 5mm slip on spacers.


1 S14 OEM Fan Shroud, it was pretty torn, from what I recall.

S14 A/C system (heater core, hoses, condenser) Everything thats under the hood of a KA S14 A/C system

Cruise Control Module, the part that bolts up to the back passenger side of the hood with the cable still attached.

Automatic KA Flex plate (flywheel, with bolts).

S14 Stock exhaust manifold and heat shield.

Will have a used stock crank pulley in about a week when I have a chance to remove it.

Also have motor mount brackets (not the motor mounts, the brackets that bolt on to the side of the block.)

Most of the EGR stuff (except for the tube that goes to the header) but all the valves.

Make offers, lowball me, just get this stuff out of here. PM me if interested in anything.
Thanks!

[Lvnismo]

Im down for the tranny... Pm bro

[akito]

wanna mail me a shift plate for 10$ shipped?

[Karlitos]

Originally Posted by akito

wanna mail me a shift plate for 10$ shipped?

Clear your PM's. There's someone interested in the whole assembly, but if that falls through, Ill let you know.

[vipa]

jw . got a sub frame or cross member?
front that is

[Karlitos]

Originally Posted by vipa

jw . got a sub frame or cross member?
front that is

Nope only what is listed, sorry. Finals week bump. Everything will be in SD by the end of the week. Will ship smaller things, and will meet within SD county this weekend if necessary. Thanks!

[Karlitos]

Last day in the central coast bump. Send me a PM and offer up. Everythings leaving to SD.