FL For sale: Dual cam KA parts! - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

InFamous Kutz · 05-07-2012, 01:53 PM

Up for sale is my collection of un-needed ka parts. All parts are in working condition, and were puled from a 120k mile ka unless noted. shipping will be on the buyer.

SR20DET Injectors in a KA fuel rail: $25. only 3 injectors. no fpr

SR20DET factory SMIC cold pipe: $10. factory cold pipe that goes from the throttle body to sidemount.

S13 Hatch tail lights: $50. driver, center piece, and pass.

extra s13 driver side tail light: $10. one crack in it.

Upper intake manifold $20. has butterflies still, both temp sensors, etc. good condition.

IACV $15. works great.

Exhaust manifold: $15. no o2 sensor, but egr pipe is already cut and blocked off.

A/C compressor bracket: $15. comes with tensioner.

Alternator: $20. works great.

Power steering pump: $10. the banjo bolt that bolts into the pump exploded on me, so idk if it's good or not. don't really care which is why it's only 10 bucks.

starter: $30. less than a year old, refurbished. worked good no clicks bangs shit like that.

MAF's: $15. 1 Left, the green one.

Torque converter: $5. don't know who would want this, but all power to you. comes with flexplate and bolts.

Valve cover: $15. es very dirty mang, but ill hit it with some degreaser. factory doo-doo color.

i probably have more things laying around, just hae to re-check. pictures will be up later.

eZiR- rps13 · 05-07-2012, 03:06 PM

s13 ka24de intake mani???
anything wrong with it? (corrosion?)
just need upper mani shippd to 92154...
lmk

InFamous Kutz · 05-07-2012, 05:19 PM

Quote:

Originally Posted by eZiR- rps13

s13 ka24de intake mani???
anything wrong with it? (corrosion?)
just need upper mani shippd to 92154...
lmk

it looks as if theres a little bit of shit on the outer part of the upper manifold, but inside it's clean. pm me for pictures.

rtrossi89 · 05-07-2012, 05:51 PM

5 speed engine harness: $75. it's a complete, 100% uncut, no clips missing, harness. although it is setup for a SAFC so there is a plug soldered into the ecu side of the harness. .

What did you mean by set up for SAFC
Also do you have the trany harness

InFamous Kutz · 05-11-2012, 11:54 PM

Quote:

Originally Posted by rtrossi89

5 speed engine harness: $75. it's a complete, 100% uncut, no clips missing, harness. although it is setup for a SAFC so there is a plug soldered into the ecu side of the harness. .

What did you mean by set up for SAFC
Also do you have the trany harness

By setup i mean if you own a SAFC, you can plug it in and go. If you do not have one it doesn't effect anything. And no i do not have a transmission harness sorry.

team13 · 05-12-2012, 06:31 AM

u have ecus ??? ill take 24

InFamous Kutz · 05-12-2012, 02:21 PM

Quote:

Originally Posted by team13

u have ecus ??? ill take 24

Both ecu's have been sold.

InFamous Kutz · 05-16-2012, 06:03 AM

up to the top.

firefighter573 · 05-16-2012, 07:08 PM

AC bracket for S13 KA24DE?

pics wont show on my comp for some ghey reason

if so...shipped to 77354?

je_decoy · 05-17-2012, 01:11 AM

willing to seperate ka exhaust cam if in good shape? pm me

InFamous Kutz · 05-20-2012, 01:47 PM

Quote:

Originally Posted by je_decoy

willing to seperate ka exhaust cam if in good shape? pm me

i'm not selling a exhaust cam.

InFamous Kutz · 05-24-2012, 06:21 AM

alot of things sold, prices have been dropped. looking for a pignose lip, half/half signals (silvia/pignose), interior things, etc.

InFamous Kutz · 05-31-2012, 02:21 PM

bump it up

sleepyeyeds14 · 06-24-2012, 08:58 PM

your ka valve cover, is it for a s14??

05-07-2012, 01:53 PM	#1
InFamous Kutz Leaky Injector Join Date: Aug 2011 Location: Tampa, Florida. Posts: 87 Trader Rating: (3) Feedback Score: 3 reviews	FS: KA24DE/SR20DET parts and S13 Parts! Up for sale is my collection of un-needed ka parts. All parts are in working condition, and were puled from a 120k mile ka unless noted. shipping will be on the buyer. SR20DET Injectors in a KA fuel rail: $25. only 3 injectors. no fpr SR20DET factory SMIC cold pipe: $10. factory cold pipe that goes from the throttle body to sidemount. S13 Hatch tail lights: $50. driver, center piece, and pass. extra s13 driver side tail light: $10. one crack in it. Upper intake manifold $20. has butterflies still, both temp sensors, etc. good condition. IACV $15. works great. Exhaust manifold: $15. no o2 sensor, but egr pipe is already cut and blocked off. A/C compressor bracket: $15. comes with tensioner. Alternator: $20. works great. Power steering pump: $10. the banjo bolt that bolts into the pump exploded on me, so idk if it's good or not. don't really care which is why it's only 10 bucks. starter: $30. less than a year old, refurbished. worked good no clicks bangs shit like that. MAF's: $15. 1 Left, the green one. Torque converter: $5. don't know who would want this, but all power to you. comes with flexplate and bolts. Valve cover: $15. es very dirty mang, but ill hit it with some degreaser. factory doo-doo color. i probably have more things laying around, just hae to re-check. pictures will be up later. Last edited by InFamous Kutz; 05-24-2012 at 06:20 AM.. Reason: PICTURES YAY!!!

05-12-2012, 06:31 AM	#6
team13 Zilvia Junkie Join Date: Mar 2004 Location: dubuque Age: 42 Posts: 353 Trader Rating: (5) Feedback Score: 5 reviews	u have ecus ??? ill take 24 __________________

05-07-2012, 05:51 PM	#4
rtrossi89 Join Date: Mar 2012 Location: ny Age: 53 Posts: 8 Trader Rating: (0) Feedback Score: 0 reviews	5 speed engine harness: $75. it's a complete, 100% uncut, no clips missing, harness. although it is setup for a SAFC so there is a plug soldered into the ecu side of the harness. . What did you mean by set up for SAFC Also do you have the trany harness

05-16-2012, 06:03 AM	#8
InFamous Kutz Leaky Injector Join Date: Aug 2011 Location: Tampa, Florida. Posts: 87 Trader Rating: (3) Feedback Score: 3 reviews	up to the top.

05-16-2012, 07:08 PM	#9
firefighter573 Leaky Injector Join Date: Nov 2009 Location: Houston,TX Posts: 50 Trader Rating: (0) Feedback Score: 0 reviews	AC bracket for S13 KA24DE? pics wont show on my comp for some ghey reason if so...shipped to 77354?

05-17-2012, 01:11 AM	#10
je_decoy Zilvia Junkie Join Date: May 2011 Location: NV-AZ Posts: 494 Trader Rating: (33) Feedback Score: 33 reviews	willing to seperate ka exhaust cam if in good shape? pm me

05-24-2012, 06:21 AM	#12
InFamous Kutz Leaky Injector Join Date: Aug 2011 Location: Tampa, Florida. Posts: 87 Trader Rating: (3) Feedback Score: 3 reviews	alot of things sold, prices have been dropped. looking for a pignose lip, half/half signals (silvia/pignose), interior things, etc.

05-31-2012, 02:21 PM	#13
InFamous Kutz Leaky Injector Join Date: Aug 2011 Location: Tampa, Florida. Posts: 87 Trader Rating: (3) Feedback Score: 3 reviews	bump it up

06-24-2012, 08:58 PM	#14
sleepyeyeds14 Leaky Injector Join Date: Sep 2010 Location: socal Age: 33 Posts: 51 Trader Rating: (0) Feedback Score: 0 reviews	your ka valve cover, is it for a s14??