NJ FS: Caged S13 drift car shell! - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

eDmSiL80 · 08-09-2012, 05:50 PM

Hey everyone. I have my long time drift car for sale. I've had it quite some time now, unfortunately i blew the motor last year. Don't have the funds to rebuild and i moved out west as well. My lose is your gain, car just needs a motor and basic stuff in order to drift. Pretty much a drift ready car. I crashed the driver side on the bank at e-town. Only bent the flca and crinkled the rad support a little. Me and my friend pulled and re-welded as good as possible and hasn't effected the performance at all. Would be good for competition or missile party. Before the car blew this was the best i ever felt behind the wheel of this thing.

Specs:

-Full chromoly tig welded cage by LM24
-Custom front tubs
-B&G coilovers 10k/8k
-Full Peak Performance suspension arms
-SPL rear subframe bushings
-Carbonetic 2-way
-Q45 front brakes
-Custom powder coated drifz by wicked powdercoating
-patched frame rails
-Buddy club bucket seat
-Crow racing harnesses
-Hydro ebrake
-Ignited kill switched (interior & exterior)
-Custom switch panel
-Custom chassis harness
-relocated battery box
-Origin 50mm rear fenders
-Wraptivo olive green wrap
-Wraptivo Carbon fiber roof wrap
*Sparco wheel not included

Drove this car in some XDC rounds and several grassroots events. I took this car apart last winter and redid the whole chassis. Patched the frame rails and re-cut the rear fenders. Everything is in tact and the drove really amazing. Sucks i have to let it go but i'm ready to start over. Just want to see this car put to good use!

Looking to get $3500 obo or willing to trade for a good street bike plus shipping it out west.

Feel free to message me on here email: [email protected] or text 609-703-2181. Thanks!

my bad for iphone shots

eclipse stig · 08-09-2012, 07:42 PM

must have been a monster when it was running... glws

Doomsdayvillian · 08-10-2012, 11:22 AM

If you put a motor and tranny in it ill trade u my
Foxbody 5 speed with lots of goodies !!

Let me know

bakagaijin180 · 08-10-2012, 12:18 PM

damn man i am moving back from Japan in March and am looking for something like this but i'm sure you dont want to keep it for that long. It looks as if you had hit the front left corner and the rear left under the over fender correct? Let me know i might want it.
.

eDmSiL80 · 08-10-2012, 03:05 PM

Thanks. Yeah I tapped the driver rear as well. But we just knocked it back out. Wasn't anything too bad. No offense but I'm trying to get rid of it ASAP. Car just chills so I want to see it go.

bakagaijin180 · 08-10-2012, 03:08 PM

Yeah i understand where exactly is the car. I might have my brother pick it up

scels240 · 08-10-2012, 04:06 PM

Good luck I have just about the same mods
N can't even get 2500
http://zilvia.net/f/cars-sale/466094...on-n-more.html

eDmSiL80 · 08-10-2012, 09:44 PM

Thanks. The car is located in south jersey bumblefuck. It's near Atco raceway. Lmk what u wanna do I have someone on standby to show it n all.

eDmSiL80 · 08-14-2012, 04:49 PM

Bump!

Sold the wheels seperately to a buddy. So the price is lowered now. Throw me a reasonable offer and let's get this thing sold!

eDmSiL80 · 08-17-2012, 05:02 PM

Bump errrr upppp.

Got several interest but all runners. Shoot me offers and let's work somethin out

eDmSiL80 · 08-20-2012, 02:59 AM

Bump

lowered to $3000 obo. Still up to trade for a streetbike.

08-09-2012, 05:50 PM	#1
eDmSiL80 Zilvia Junkie Join Date: Sep 2005 Location: SoCal Age: 36 Posts: 523 Trader Rating: (9) Feedback Score: 9 reviews	FS: Caged S13 drift car shell! Hey everyone. I have my long time drift car for sale. I've had it quite some time now, unfortunately i blew the motor last year. Don't have the funds to rebuild and i moved out west as well. My lose is your gain, car just needs a motor and basic stuff in order to drift. Pretty much a drift ready car. I crashed the driver side on the bank at e-town. Only bent the flca and crinkled the rad support a little. Me and my friend pulled and re-welded as good as possible and hasn't effected the performance at all. Would be good for competition or missile party. Before the car blew this was the best i ever felt behind the wheel of this thing. Specs: -Full chromoly tig welded cage by LM24 -Custom front tubs -B&G coilovers 10k/8k -Full Peak Performance suspension arms -SPL rear subframe bushings -Carbonetic 2-way -Q45 front brakes -Custom powder coated drifz by wicked powdercoating -patched frame rails -Buddy club bucket seat -Crow racing harnesses -Hydro ebrake -Ignited kill switched (interior & exterior) -Custom switch panel -Custom chassis harness -relocated battery box -Origin 50mm rear fenders -Wraptivo olive green wrap -Wraptivo Carbon fiber roof wrap *Sparco wheel not included Drove this car in some XDC rounds and several grassroots events. I took this car apart last winter and redid the whole chassis. Patched the frame rails and re-cut the rear fenders. Everything is in tact and the drove really amazing. Sucks i have to let it go but i'm ready to start over. Just want to see this car put to good use! Looking to get $3500 obo or willing to trade for a good street bike plus shipping it out west. Feel free to message me on here email: [email protected] or text 609-703-2181. Thanks! my bad for iphone shots

08-10-2012, 12:18 PM	#4
bakagaijin180 Join Date: Aug 2012 Location: Japan Age: 37 Posts: 4 Trader Rating: (0) Feedback Score: 0 reviews	damn damn man i am moving back from Japan in March and am looking for something like this but i'm sure you dont want to keep it for that long. It looks as if you had hit the front left corner and the rear left under the over fender correct? Let me know i might want it. .

08-09-2012, 07:42 PM	#2
eclipse stig Join Date: Jul 2012 Location: Allentown, PA Age: 34 Posts: 44 Trader Rating: (0) Feedback Score: 0 reviews	must have been a monster when it was running... glws

08-10-2012, 11:22 AM	#3
Doomsdayvillian Join Date: Jul 2012 Location: Long island Posts: 26 Trader Rating: (0) Feedback Score: 0 reviews	If you put a motor and tranny in it ill trade u my Foxbody 5 speed with lots of goodies !! Let me know

08-10-2012, 03:05 PM	#5
eDmSiL80 Zilvia Junkie Join Date: Sep 2005 Location: SoCal Age: 36 Posts: 523 Trader Rating: (9) Feedback Score: 9 reviews	Thanks. Yeah I tapped the driver rear as well. But we just knocked it back out. Wasn't anything too bad. No offense but I'm trying to get rid of it ASAP. Car just chills so I want to see it go.

08-10-2012, 03:08 PM	#6
bakagaijin180 Join Date: Aug 2012 Location: Japan Age: 37 Posts: 4 Trader Rating: (0) Feedback Score: 0 reviews	Yeah i understand where exactly is the car. I might have my brother pick it up

08-10-2012, 04:06 PM	#7
scels240 Nissanaholic! Join Date: Jun 2008 Location: Koreatown, Ca Age: 34 Posts: 2,025 Trader Rating: (19) Feedback Score: 19 reviews	Good luck I have just about the same mods N can't even get 2500 http://zilvia.net/f/cars-sale/466094...on-n-more.html

08-10-2012, 09:44 PM	#8
eDmSiL80 Zilvia Junkie Join Date: Sep 2005 Location: SoCal Age: 36 Posts: 523 Trader Rating: (9) Feedback Score: 9 reviews	Thanks. The car is located in south jersey bumblefuck. It's near Atco raceway. Lmk what u wanna do I have someone on standby to show it n all.

08-14-2012, 04:49 PM	#9
eDmSiL80 Zilvia Junkie Join Date: Sep 2005 Location: SoCal Age: 36 Posts: 523 Trader Rating: (9) Feedback Score: 9 reviews	Bump! Sold the wheels seperately to a buddy. So the price is lowered now. Throw me a reasonable offer and let's get this thing sold!

08-17-2012, 05:02 PM	#10
eDmSiL80 Zilvia Junkie Join Date: Sep 2005 Location: SoCal Age: 36 Posts: 523 Trader Rating: (9) Feedback Score: 9 reviews	Bump errrr upppp. Got several interest but all runners. Shoot me offers and let's work somethin out

08-20-2012, 02:59 AM	#11
eDmSiL80 Zilvia Junkie Join Date: Sep 2005 Location: SoCal Age: 36 Posts: 523 Trader Rating: (9) Feedback Score: 9 reviews	Bump lowered to $3000 obo. Still up to trade for a streetbike.