Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk

Tech Talk Technical Discussion About The Nissan 240SX and Nissan Z Cars


Reply
 
Thread Tools Display Modes
Old 12-06-2012, 09:16 AM   #1
worr20
Zilvia Member
 
worr20's Avatar
 
Join Date: Jan 2007
Location: Hawaii/W.V.
Posts: 153
Trader Rating: (1)
worr20 is an unknown quantity at this point
Feedback Score: 1 reviews
Car was running rich but is fine now

So I bought an s13 that was running crazy rich. As in, on start and warm up im in the 10's, regular driving im in the 11's and sitting at a light and afr's are dipping into the 9's. I never really got on it till yesterday when I did a good wot 2-3 gear pull. Now the car is fine. 14-15s regular driving and 12's wot. Kinda going reverse but I wonder what the problem was?
worr20 is offline   Reply With Quote
Sponsored Links
Old 12-06-2012, 09:44 AM   #2
240jake
Zilvia Member
 
Join Date: Nov 2008
Location: New Mexico
Age: 41
Posts: 213
Trader Rating: (0)
240jake is an unknown quantity at this point
Feedback Score: 0 reviews
I had a similar issue where my injector orings would seal, then unseal themselves causing the rich running, i say pull/replace all injector orings and see if it doesnt stop.

glad to hear shes running well again, gotta love it!
240jake is offline   Reply With Quote
Old 12-06-2012, 10:42 AM   #3
worr20
Zilvia Member
 
worr20's Avatar
 
Join Date: Jan 2007
Location: Hawaii/W.V.
Posts: 153
Trader Rating: (1)
worr20 is an unknown quantity at this point
Feedback Score: 1 reviews
Ha well I spoke to soon. I went for a drive just now and its back to rich. jinxed it. lol Ill be checking o rings later today.
worr20 is offline   Reply With Quote
Old 12-10-2012, 08:06 AM   #4
worr20
Zilvia Member
 
worr20's Avatar
 
Join Date: Jan 2007
Location: Hawaii/W.V.
Posts: 153
Trader Rating: (1)
worr20 is an unknown quantity at this point
Feedback Score: 1 reviews
so....I cleaned/moved the maf to the stock location cause it was ziptied down by the swaybar. I noticed that the maf wires were cut/reattached and i kind of moved them around a bit and afr's went normal. I guess my voltage is getting messed up.
worr20 is offline   Reply With Quote
Reply

Bookmarks



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 05:12 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vB.Sponsors
Copyright ? 1998 - 2022, Zilvia.net