RWD SR20DE header - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Matej · 06-30-2013, 11:09 PM

Seeking a one-piece N/A SR header, preferably a 4-2-1 style.
One that clears or is close to clearing LHD steering would be best.
Thank you for looking.

Spencer dougherty · 07-02-2013, 12:35 AM

i uses a aftermarket turbo manie and made my owe down pipe off that with a 4 bolt flange.. was supper easy and made more power then the stock one.

Matej · 07-03-2013, 08:51 PM

Quote:

Originally Posted by Spencer dougherty

i uses a aftermarket turbo manie and made my owe down pipe off that with a 4 bolt flange.. was supper easy and made more power then the stock one.

You should mass-produce it.

I thought about how convenient such a thing would be, since there are so many various manifolds available that it could be used with, on both SR's and KA's.

The stock SR20DE exhaust manifold mates directly to the S13 KA lower downpipe, but I do not really want the heavy stock setup.

driftinCleen · 07-02-2013, 06:03 AM

I have what you need
but has a hole that will need to be welded

Mrpopo · 07-02-2013, 10:21 AM

I used a ka header. I cut off the ka flange that mounts to the head and welded on an SR flange. Works perfectly.

Matej · 07-03-2013, 08:46 PM

Quote:

Originally Posted by Mrpopo

I used a ka header. I cut off the ka flange that mounts to the head and welded on an SR flange. Works perfectly.

That is the backup plan. Just thought I would ask first, in case anyone happens to have an actual SR header.

06-30-2013, 11:09 PM	#1
Matej Post Whore! Join Date: Feb 2007 Location: N/A Posts: 9,423 Trader Rating: (39) Feedback Score: 39 reviews	RWD SR20DE header Seeking a one-piece N/A SR header, preferably a 4-2-1 style. One that clears or is close to clearing LHD steering would be best. Thank you for looking.

07-02-2013, 12:35 AM	#2
Spencer dougherty Post Whore! Join Date: Feb 2007 Location: Santa Ana CA SideWays Performance 1(714)330-0021 Age: 42 Posts: 2,554 Trader Rating: (65) Rides Gallery: Spencer dougherty Feedback Score: 65 reviews	i uses a aftermarket turbo manie and made my owe down pipe off that with a 4 bolt flange.. was supper easy and made more power then the stock one.

07-02-2013, 06:03 AM	#4
driftinCleen Join Date: Jun 2013 Location: flo-rida Posts: 19 Trader Rating: (1) Feedback Score: 1 reviews	I have what you need but has a hole that will need to be welded

07-02-2013, 10:21 AM	#5
Mrpopo Zilvia Member Join Date: Jun 2011 Location: Gwinnett, GA Age: 45 Posts: 293 Trader Rating: (5) Feedback Score: 5 reviews	I used a ka header. I cut off the ka flange that mounts to the head and welded on an SR flange. Works perfectly.