CT Partout or DD S13 Skyline RB25DET GTT NEO - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

bxsvx · 07-06-2013, 02:55 PM

Whats up everyone, helping out a buddy who has a s13 he is parting out. He can either part it out or put it back to a daily driver if needed!

Here's his contact info: shillopellos at yahoo.com

This is a partial list of major items I have for sale. All components have approximately 22K miles on them and are not older than 2009 when my project was completed.
Let me know if you are interested in any of these and we can even work out a deal.
Please do not waste my time with lowball offers or offsers to trade. Thanks

Startup and warm-up videos and walk around:
https://www.youtube.com/watch?v=IKBR...e_gdata_player

https://www.youtube.com/watch?v=SR7X...e_gdata_player

Parts off the car:
240SX Photos by shillopellos | Photobucket

Parts below are for a turnkey Swap. Simply drop in, connect to your existing vehicle harness and fire it up.
RB25DET NEO from a 2001 Skyline R34 GTT with 33000 Km
New timing belt
New rollers
New idler
New water pump
Impul re-mapped ECU
Conversion harness, no CEL on and full diagnostics capable
Top Hat Performance engine and transmission mounts for RB25DET
Driveshaft shop custom length single piece driveshaft
Greddy big mouth intake with K&N washable filter. - $4000

Full 3" cat back system with Carbon fiber canister - $200
Inline Fuel Pressure gauge - $10
Greddy style RB25DET manifold (New, never installed) - $250
90mm throttle body - $100

6 x 23 core bar and plate intercooler -(====)-
Custom welded 3" intercooler piping
3 ply silicone hoses throughout - $350

Setrab Oil cooler with -10 lines and sandwich plate + Filter relocation - $250
Autometer carbon series boost/vaccum gauge to 30Psi - $50
A pillar double gauge pod (black) - $10
JIC FLT-A2 coilover system with camber plates- spanners and perch adjusters included- US version- JIC USA will service if needed - 1300
Tanabe rear upper control arms with heim joints - $200
LS automotive 180MPH speedo conversion (KA24E/DE/SR20DET) - $100

B Magic FRP 40mm rear widebody quarter panels- never installed - $250
S14 kouki custom fitted wing - $150
Custom 4 pod headlights - $60

Oil catch can - $30
Attain 5 lug conversion hubs complete with knuckles L&R - $400
13" Front brakes with billet caliper brackets, 300ZX calipers and Russell SS brake lines (28mm Mercedes SL55AMG rotors - NEW) - $650
300ZX brake master cylinder 1 5/8"with conversion ports - $100
300ZX Rear calipers, rotors and Russell SS brake lines. Fully functional e-brake with cables provided + 5 lug conversion - $500
NRG steering wheel quick release and adapter hub - $150
Driver and passenger RECARO SPG bucket seats with custom brackets and sliders (direct bolt in) - Set - $800

Rays engineering G-Games Falcon 77 2 piece forged wheels finished in gun metal color 18 x 8 Front and 18 x 9 rear
Sumitomo tires 235/40/R18 front and 265/35/R18 rear - $850

07-06-2013, 02:55 PM	#1
bxsvx Leaky Injector Join Date: Jan 2006 Location: NYC Posts: 141 Trader Rating: (1) Feedback Score: 1 reviews	Partout or DD S13 Skyline RB25DET GTT NEO Whats up everyone, helping out a buddy who has a s13 he is parting out. He can either part it out or put it back to a daily driver if needed! Here's his contact info: *shillopellos at yahoo.com* This is a partial list of major items I have for sale. All components have approximately 22K miles on them and are not older than 2009 when my project was completed. Let me know if you are interested in any of these and we can even work out a deal. Please do not waste my time with lowball offers or offsers to trade. Thanks Startup and warm-up videos and walk around: https://www.youtube.com/watch?v=IKBR...e_gdata_player https://www.youtube.com/watch?v=SR7X...e_gdata_player Parts off the car: 240SX Photos by shillopellos \| Photobucket Parts below are for a turnkey Swap. Simply drop in, connect to your existing vehicle harness and fire it up. RB25DET NEO from a 2001 Skyline R34 GTT with 33000 Km New timing belt New rollers New idler New water pump Impul re-mapped ECU Conversion harness, no CEL on and full diagnostics capable Top Hat Performance engine and transmission mounts for RB25DET Driveshaft shop custom length single piece driveshaft Greddy big mouth intake with K&N washable filter. - $4000 Full 3" cat back system with Carbon fiber canister - $200 Inline Fuel Pressure gauge - $10 Greddy style RB25DET manifold (New, never installed) - $250 90mm throttle body - $100 6 x 23 core bar and plate intercooler -(====)- Custom welded 3" intercooler piping 3 ply silicone hoses throughout - $350 Setrab Oil cooler with -10 lines and sandwich plate + Filter relocation - $250 Autometer carbon series boost/vaccum gauge to 30Psi - $50 A pillar double gauge pod (black) - $10 JIC FLT-A2 coilover system with camber plates- spanners and perch adjusters included- US version- JIC USA will service if needed - 1300 Tanabe rear upper control arms with heim joints - $200 LS automotive 180MPH speedo conversion (KA24E/DE/SR20DET) - $100 B Magic FRP 40mm rear widebody quarter panels- never installed - $250 S14 kouki custom fitted wing - $150 Custom 4 pod headlights - $60 Oil catch can - $30 Attain 5 lug conversion hubs complete with knuckles L&R - $400 13" Front brakes with billet caliper brackets, 300ZX calipers and Russell SS brake lines (28mm Mercedes SL55AMG rotors - NEW) - $650 300ZX brake master cylinder 1 5/8"with conversion ports - $100 300ZX Rear calipers, rotors and Russell SS brake lines. Fully functional e-brake with cables provided + 5 lug conversion - $500 NRG steering wheel quick release and adapter hub - $150 Driver and passenger RECARO SPG bucket seats with custom brackets and sliders (direct bolt in) - Set - $800 Rays engineering G-Games Falcon 77 2 piece forged wheels finished in gun metal color 18 x 8 Front and 18 x 9 rear Sumitomo tires 235/40/R18 front and 265/35/R18 rear - $850 Last edited by bxsvx; 11-09-2013 at 11:29 AM.. Reason: Items sold