KA24DE new clutch problems. - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

oscarsx · 11-10-2013, 02:02 PM

I installed a new EXEDY clutch with a brand new flywheel just last night. I also replaced my slave cylinder.

Now the problem I'm having is I can't shift into gears right. I can shift into first and second, but I really have to hammer down on it and anything after that It grinds. I installed the clutch disk correctly and everything is torqued down to spec. I can't seem to figure out what's making my gears go in rough..

I've read this last hour and no one had really answered the question, besides adjusting the clutch pedal, which I'm going to try now. Any other suggestions would be great, Thanks.

11-10-2013, 02:02 PM	#1
oscarsx Zilvia Addict Join Date: Apr 2006 Location: SoCal Posts: 697 Trader Rating: (6) Feedback Score: 6 reviews	KA24DE new clutch problems. I installed a new EXEDY clutch with a brand new flywheel just last night. I also replaced my slave cylinder. Now the problem I'm having is I can't shift into gears right. I can shift into first and second, but I really have to hammer down on it and anything after that It grinds. I installed the clutch disk correctly and everything is torqued down to spec. I can't seem to figure out what's making my gears go in rough.. I've read this last hour and no one had really answered the question, besides adjusting the clutch pedal, which I'm going to try now. Any other suggestions would be great, Thanks. __________________ IG: @ozc2jz