NC ITBs for VH45de

[OpenThrottle]

Name: AJ
Item(s): ITBs for vh45
Price: $500 + shipping
Location: Chapel Hill, NC
Contact info: post in thread or PM me


For sale is an ITB setup for a vh45de engine. Following will be included:

-12 individual throttle bodies (you will have 4 extras)
-6 custom billet flanges to mate the ITBs to the vh45 heads
-8 Air Horns
-8 Mesh covers for horns
-8 Injectors
-4 feet of Fuel Rail Stock so you can make a custom fuel rail
-2 TPS sensors
-and anything else that you see in the pictures or that I have for this ITB setup

The ITBs with horns sit up about 2-4 inches shorter than the stock intake manifold. You can remove the horns and the ITB is maybe an inch taller
than the top edge of the valve covers.

There is still a little bit of work that needs to be done for this to be complete:
1) Get a standalone ECU. MS3 or EMU Black ECU would be good options.
2) Make a linkage kit or just order a Jenvey V-Engine Linkage kit.
3) Shorten the ITB Linkage Rod and drill new holes
4) Fuel rail

I am kind of firm on the price but shoot me an offer and maybe we can work something out.

[OpenThrottle]

bump.......

[OpenThrottle]

bump......

[OpenThrottle]

bump......

[OpenThrottle]

To the top...

[OpenThrottle]

Bump......

[Fitelite240]

I'm tempted to see if this will work on my LS

[OpenThrottle]

Originally Posted by Fitelite240

I'm tempted to see if this will work on my LS

I wouldn't waste my money honestly. Head port designs are way different. Your cheap solution is OBX or if you want quality (a.k.a money) Jenvey/Harrop/Borla for a LSx ITB setups.

[OpenThrottle]

bump.................

[stylZ32]

Size of injectors?
I noticed you said 6 flanges, are these flanges individual per each ITB (need 8?) or a full plate(need 2) for each side? (picture, please)
Thanks, very interested in this setup for my build.

[OpenThrottle]

Originally Posted by stylZ32

Size of injectors?
I noticed you said 6 flanges, are these flanges individual per each ITB (need 8?) or a full plate(need 2) for each side? (picture, please)
Thanks, very interested in this setup for my build.

They are 32# mustang injectors if I remember correctly.

6 total flanges - 3 per side. Bottom one that goes to the head, middle one that connects the top flange to the bottom one, and then top flange for the ITBs. You can kind of see it in one of the pictures.

PM your phone number and I can text you more pictures if interested. I’d rather do that than post flange pictures on here and then have a bunch of people copy them.

[OpenThrottle]

SOLD


Mods - please close thread.