TN SR20 + S13 parts- Turbo, Nistune, Greddy, Suspension, LS Coils - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

zainracer · 01-26-2020, 09:01 PM

Cleaning out a bunch of old parts, prices are mostly firm unless you are buying multiple items. Will consider reasonable offers.
Shipping is not included, will be shipping from 38104. Most stuff would be $10 to $40 to ship but I can get exact quote if needed.
I have pictures of most items, can get more pictures if needed.

Best way to contact is via PM

Pictures included below, alot more pictures on my googledrive: https://drive.google.com/open?id=13W...arpbzx-2HIQ1Gt

Walbaro 255 fuel pump (~6 years old, worked fine when removed) one of the retaining clips is broken (see pictures): $15
S13 stock rear arms with Energy suspension bushings and zerks fittings to allow proper greasing: $30
S14 SR20 ?WC? ECU with Nistune Type 3 board installed, includes individual Nistune License and Nistune cable. (698 from Nistune): $400
Greddy induction kit for T28 bottom mount turbo with custom Aluminum air box (designed for S13), all wrapped in DEI Gold tape: $180 ($160 without the airbox)
OEM Z32 MAF, Wrapped in DEI Gold tape: $80
BOV Recirculation setup for T28 turbo works with Turbo Smart Kompact dual port BOV (Everything from turbo inlet to BOV included): $100
Ebay S14/S15 SR20 Intake manifold (typical cheap ebay quality, never installed, just test fitted): $30
Radium FPR with gauge: $80
Unknown brand SR20 T28 oil and coolant lines: $85
Ignition coils from S14 sr20 with harness: $80
4x LS2 Ignition coils (I have 2 sets). $70, $100 for all 8
Wiring specialties LS2 Coil conversion harness (New, never used): $80
SR20 OEM Ignitor Chip: $25
Subaru STI 550 CC side feed injectors with modified SR20 harness to make this plug and play!: $110
~5 year old Wiring Specialties S14 SR20 into 91 S13 Manual chassis conversion harness. Includes main and lower/transmission harness. Missing Alternator plug, and I modified the harness in a couple places. Sill plug and plan for S14 sr20 into S13. Can provide more details if interested: $200
AEM UEGO Wideband, around 5 years old (~20k miles of use). Some of the LEDs (see picture) don't work but I have the cable needed to plug this into your laptop and log wideband Data with Nistune (or other software) $65.
GKTech SR20 Coolant neck spacer (new): $20
DIF Differential bushings for S14: $10
Old 5Point harness $10
Rocker arms stoppers (2 sets) $20 each

LS Coils and WS harness

cclassics · 01-27-2020, 12:15 AM

ill take the valve cover- send me a price for shipping to 98264
thanks

s13-ghost · 01-27-2020, 07:45 AM

^^if he doesnt buy valve cover I'll take it.

cali coasting s13 · 01-27-2020, 10:50 AM

Still have the Greddy divided outlet?

zainracer · 01-27-2020, 09:33 PM

Valve cover is pending, will update if that falls through. I still have the turbo outlet, pending on that as well. Also have someone interested in the full turbo, ECU, turbo outlet setup so want to see if that goes through before separating that.

Tearlessj · 01-27-2020, 11:42 PM

I'll text you about the arms!

cclassics · 01-28-2020, 12:05 AM

valve cover pmt sent-- post a pic of the z3 motor mounts..

RalliartRsX · 01-28-2020, 04:16 AM

Z3 motor mounts are spoken for.

zainracer · 01-31-2020, 11:05 AM

Valve cover and Z3 mounts sold and shipped.
Added a few new items.
I have had some interested in the intake and exhaust stuff but I would rather sell that as a package so only consider package sale unless I have some interested in most of the individual parts. It is a REALLY good setup for maximizing what you can do with a stock turbo/stock motor or switch the turbo out for a Garrett t28 and easily make 350whp (or more!).

zainracer · 03-17-2020, 03:14 PM

Bump! updated with sold items removed. Home for the next few weeks so should be able to ship stuff within 1-2 days!

zainracer · 04-15-2020, 09:58 AM

Bump, updated with slightly lower prices and sold items remove.

zainracer · 09-16-2021, 11:08 AM

Bump,
I am back in town for a few weeks and able to ship stuff out.
Happy to work on pricing if you want multiple items

I can sell all 20 items listed for $1250 shipped in the US. Firm on this price/package.

hookhead21 · 10-27-2021, 06:49 PM

I?ll take the Nistune ecu if available

zainracer · 10-27-2021, 07:33 PM

Quote:

Originally Posted by hookhead21

I?ll take the Nistune ecu if available

Yep, still have it!
sent you an email.

hookhead21 · 10-27-2021, 11:35 PM

Quote:

Originally Posted by zainracer

Yep, still have it!
sent you an email.

Do you mind re sending it [email protected] I haven?t received it. And does it come with consult cable thanks 😊

panmanstan · 10-30-2021, 07:17 PM

Still have greddy intake and outlet elbow?

01-26-2020, 09:01 PM	#1
zainracer Leaky Injector Join Date: Dec 2010 Location: Tennessee Posts: 82 Trader Rating: (6) Feedback Score: 6 reviews	SR20 + S13 parts- Turbo, Nistune, AEM, Suspension, LS Coils Cleaning out a bunch of old parts, prices are mostly firm unless you are buying multiple items. Will consider reasonable offers. Shipping is not included, will be shipping from 38104. Most stuff would be $10 to $40 to ship but I can get exact quote if needed. I have pictures of most items, can get more pictures if needed. Best way to contact is via PM Pictures included below, alot more pictures on my googledrive: https://drive.google.com/open?id=13W...arpbzx-2HIQ1Gt Walbaro 255 fuel pump (~6 years old, worked fine when removed) one of the retaining clips is broken (see pictures): $15 S13 stock rear arms with Energy suspension bushings and zerks fittings to allow proper greasing: $30 S14 SR20 ?WC? ECU with Nistune Type 3 board installed, includes individual Nistune License and Nistune cable. (698 from Nistune): $400 Greddy induction kit for T28 bottom mount turbo with custom Aluminum air box (designed for S13), all wrapped in DEI Gold tape: $180 ($160 without the airbox) OEM Z32 MAF, Wrapped in DEI Gold tape: $80 BOV Recirculation setup for T28 turbo works with Turbo Smart Kompact dual port BOV (Everything from turbo inlet to BOV included): $100 Ebay S14/S15 SR20 Intake manifold (typical cheap ebay quality, never installed, just test fitted): $30 Radium FPR with gauge: $80 Unknown brand SR20 T28 oil and coolant lines: $85 Ignition coils from S14 sr20 with harness: $80 4x LS2 Ignition coils (I have 2 sets). $70, $100 for all 8 Wiring specialties LS2 Coil conversion harness (New, never used): $80 SR20 OEM Ignitor Chip: $25 Subaru STI 550 CC side feed injectors with modified SR20 harness to make this plug and play!: $110 ~5 year old Wiring Specialties S14 SR20 into 91 S13 Manual chassis conversion harness. Includes main and lower/transmission harness. Missing Alternator plug, and I modified the harness in a couple places. Sill plug and plan for S14 sr20 into S13. Can provide more details if interested: $200 AEM UEGO Wideband, around 5 years old (~20k miles of use). Some of the LEDs (see picture) don't work but I have the cable needed to plug this into your laptop and log wideband Data with Nistune (or other software) $65. GKTech SR20 Coolant neck spacer (new): $20 DIF Differential bushings for S14: $10 Old 5Point harness $10 Rocker arms stoppers (2 sets) $20 each LS Coils and WS harness Last edited by zainracer; 09-16-2021 at 10:56 AM.. Reason: Updated with sold items removed

01-27-2020, 11:42 PM	#6
Tearlessj Nissanaholic! Join Date: Feb 2007 Location: Memphis Age: 33 Posts: 1,907 Trader Rating: (6) Feedback Score: 6 reviews	I'll text you about the arms! __________________ Nagasaki Motors Friends help you move. Real friends help you move bodies.

10-27-2021, 06:49 PM	#13
hookhead21 Join Date: Oct 2021 Location: Los angeles Age: 30 Posts: 5 Trader Rating: (0) Feedback Score: 0 reviews	Ecu I?ll take the Nistune ecu if available

01-27-2020, 12:15 AM	#2
cclassics Join Date: Jan 2020 Location: Langley Posts: 9 Trader Rating: (0) Feedback Score: 0 reviews	ill take the valve cover- send me a price for shipping to 98264 thanks

01-27-2020, 07:45 AM	#3
s13-ghost Zilvia Addict Join Date: Nov 2009 Location: Vista, CA Age: 33 Posts: 740 Trader Rating: (18) Feedback Score: 18 reviews	^^if he doesnt buy valve cover I'll take it.

01-27-2020, 10:50 AM	#4
cali coasting s13 Join Date: Oct 2009 Location: San Diego Posts: 21 Trader Rating: (2) Feedback Score: 2 reviews	Still have the Greddy divided outlet?

01-27-2020, 09:33 PM	#5
zainracer Leaky Injector Join Date: Dec 2010 Location: Tennessee Posts: 82 Trader Rating: (6) Feedback Score: 6 reviews	Valve cover is pending, will update if that falls through. I still have the turbo outlet, pending on that as well. Also have someone interested in the full turbo, ECU, turbo outlet setup so want to see if that goes through before separating that.

01-28-2020, 12:05 AM	#7
cclassics Join Date: Jan 2020 Location: Langley Posts: 9 Trader Rating: (0) Feedback Score: 0 reviews	valve cover pmt sent-- post a pic of the z3 motor mounts..

01-28-2020, 04:16 AM	#8
RalliartRsX Post Whore! Join Date: Apr 2006 Location: Maryland Posts: 4,793 Trader Rating: (32) Feedback Score: 32 reviews	Z3 motor mounts are spoken for.

01-31-2020, 11:05 AM	#9
zainracer Leaky Injector Join Date: Dec 2010 Location: Tennessee Posts: 82 Trader Rating: (6) Feedback Score: 6 reviews	Valve cover and Z3 mounts sold and shipped. Added a few new items. I have had some interested in the intake and exhaust stuff but I would rather sell that as a package so only consider package sale unless I have some interested in most of the individual parts. It is a REALLY good setup for maximizing what you can do with a stock turbo/stock motor or switch the turbo out for a Garrett t28 and easily make 350whp (or more!).

03-17-2020, 03:14 PM	#10
zainracer Leaky Injector Join Date: Dec 2010 Location: Tennessee Posts: 82 Trader Rating: (6) Feedback Score: 6 reviews	Bump! updated with sold items removed. Home for the next few weeks so should be able to ship stuff within 1-2 days!

04-15-2020, 09:58 AM	#11
zainracer Leaky Injector Join Date: Dec 2010 Location: Tennessee Posts: 82 Trader Rating: (6) Feedback Score: 6 reviews	Bump, updated with slightly lower prices and sold items remove.

09-16-2021, 11:08 AM	#12
zainracer Leaky Injector Join Date: Dec 2010 Location: Tennessee Posts: 82 Trader Rating: (6) Feedback Score: 6 reviews	Bump, I am back in town for a few weeks and able to ship stuff out. Happy to work on pricing if you want multiple items I can sell all 20 items listed for $1250 shipped in the US. Firm on this price/package.

10-30-2021, 07:17 PM	#16
panmanstan Leaky Injector Join Date: Oct 2016 Location: South Eastern NC Posts: 59 Trader Rating: (2) Feedback Score: 2 reviews	Still have greddy intake and outlet elbow?