Im installing a head unit

[gh6o6]

</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote </td></tr><tr><td id="QUOTE">
Here:
I followed this exactly and had no problems bypassing the stock amps.

1 Blue left front speaker neg. input

2 Black right front speaker pos. input

3 Blue/yellow left front speaker neg. output

4 Brown/white right front speaker neg. output

5 Brown right front speaker pos. output

6 Pink left front speaker pos. input

7 White right front speaker neg. input

8 Blue/white left front speaker pos. output

9 Blue acc.

10 Green/red on/off

11 Purple left rear speaker neg. input

12 Pink right rear speaker neg. input

13 Green left rear speaker neg. output

14 Pink right rear speaker neg. output

15 Blue right rear speaker pos. output

16 Green left rear speaker pos. input

17 Blue right rear speaker pos. input

18 Red left rear speaker pos. output

19 Blue acc

20 Green/red on/off



Splices:



1 to 3

2 to 5

4 to 7

6 to 8

11 to 13

12 to 14

15 to 17

16 to 18

Good Luck
</td></tr></table><span id='postcolor'>
if i do that, get a wiring harness, and install the unit do i need to do anything else?
also how permanent is bypassing the amp?