Motor Mounts and T/C Rods with PICS THAT WORK!!! - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Thieu · 08-10-2005, 09:13 AM

My old Motor Mounts (both motor + tranny). Can only be used to fill with poly as they are shot. I'm looking to get $50 shipped.

A set of heim joint/pillow ball t/c rods (the blue ones from ebay.. forget the brand). Not in perfect condition, but work flawlessly (were on car for 8 months). Looking to get $100 shipped.

One of the studs on one of the t/c rod is stripped out. It's basically a car wheel stud. You can still tighten it on the car without a problem, but you need to hold the head of the stud while doing so.

08-10-2005, 09:13 AM	#1
Thieu Zilvia Member Join Date: Sep 2003 Location: tx Posts: 199 Trader Rating: (0) Feedback Score: 0 reviews	Motor Mounts and T/C Rods with PICS THAT WORK!!! My old Motor Mounts (both motor + tranny). Can only be used to fill with poly as they are shot. I'm looking to get $50 shipped. A set of heim joint/pillow ball t/c rods (the blue ones from ebay.. forget the brand). Not in perfect condition, but work flawlessly (were on car for 8 months). Looking to get $100 shipped. One of the studs on one of the t/c rod is stripped out. It's basically a car wheel stud. You can still tighten it on the car without a problem, but you need to hold the head of the stud while doing so. __________________ 90 240sx daily driver/project car "SOHC it to me" Last edited by Thieu; 08-10-2005 at 03:41 PM..