S13-KTS, 300ZX Brakes, 17x8/17x9, 235/45 - 255/40? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

BlazedGlory · 01-23-2006, 04:27 AM

I know people are running this setup because I've read about it somewhere, but I've been searching for the last hour or so and cannot seem to find it. I appologize if I've overlooked it.

I have an S13 (hatch). I'm getting KTS coilovers, 300zx front brakes, 17x8 +35 and 17x9 +20 5zigen fno1rc's (4-lug) with 235/45-17 and 255/40-17 Bridgestone Potenza RE750's. Will I need to run spacers anywhere to get this to fit? I've been told that I really need a +25 offset on those 8" wheels. If this is so, where can I get a 10mm hubcentric spacer? H&R only sells a 5mm and a 15mm (w/ studs) I think. If I get two 5mm spacers could I use the factory studs still? Will I need to roll fenders?

Thanks!

01-23-2006, 04:27 AM	#1
BlazedGlory Zilvia Junkie Join Date: Jan 2003 Location: Canton, GA Posts: 370 Trader Rating: (1) Feedback Score: 1 reviews	S13-KTS, 300ZX Brakes, 17x8/17x9, 235/45 - 255/40? I know people are running this setup because I've read about it somewhere, but I've been searching for the last hour or so and cannot seem to find it. I appologize if I've overlooked it. I have an S13 (hatch). I'm getting KTS coilovers, 300zx front brakes, 17x8 +35 and 17x9 +20 5zigen fno1rc's (4-lug) with 235/45-17 and 255/40-17 Bridgestone Potenza RE750's. Will I need to run spacers anywhere to get this to fit? I've been told that I really need a +25 offset on those 8" wheels. If this is so, where can I get a 10mm hubcentric spacer? H&R only sells a 5mm and a 15mm (w/ studs) I think. If I get two 5mm spacers could I use the factory studs still? Will I need to roll fenders? Thanks!