New Japanese brand's debut in the USA: Parts Shop MAX

[DC Dan MAX USA]

Originally Posted by benjim

I havent not gone through this whole post but is anyone using the oil cooler kit? If you are did you implement a thermostat? Is it necessary?

No one to my knowledge that bought the MAX oil cooler has a thermostat.
If you are running in the winter and you guage reads too cold, you can simply cover part or all of the air flow to the cooler.

FYI. we are put of the stainless steel braided cooler kits but have lots of 19 row oil cooler kits in stock for $60 each.

[hitman]

i use them at the same time sometimes. while drifting i cant notice it but while sitting in my car waiting when you are on foot brake and pull ebrake and vice versa you can feel it on your hand or pedal

[DC Dan MAX USA]

I know this is a nissan forum but a couple of people who own FC3S RX7's have hit up this thread asking about our new coilover application, so here is the "low down"

From the front page news: MAX competition coilovers for FC3S RX7

Parts shop MAX expands its aggressive coilover applications to include another classic drift chassis, the FC3S. This new application comes with standard 8/10KG springs.
Unique features include caster and camber adjustment in the top plate, independant camber adjust on the bottom bracket & offset urethane rear lower mount in addition to all of the great features S chassis owners have come to enjoy. In stock now in the USA.





Works great, For first hand impression just ask Martin here at PSMUSA He has been running the prototypes for a very long time now:

[DrftKingIII]

I can paypal the $ for the subframe spacers for my S14 now, and down the road Ill be interested in buying some coilovers.

How much for shipping to 63132?

Thanks,
Mike

[DC Dan MAX USA]

We're out right now so perhaps just get them when you are ready for the coilovers and they can go in the same box for zero shipping fees.

[Eric911]

how much for fender roller and s13 rad shipped to 94954

[DC Dan MAX USA]

$430 for both items shipped to you.

[Eric911]

just sent you the money
thanks

[DC Dan MAX USA]

Originally Posted by Eric911

just sent you the money
thanks

you probably received them by now, thank you.

[jfc3po]

seat update?

and how much for s13 rucas shipped to 27615?

[DC Dan MAX USA]

Originally Posted by jfc3po

seat update?

and how much for s13 rucas shipped to 27615?

SEAT UPDATE LINK!

RUCA's are out of stock but we have more coming from Japan right now. $200 shipped to you.

[S14DB]

Originally Posted by DC Dan MAX USA

SEAT UPDATE LINK!

RUCA's are out of stock but we have more coming from Japan right now. $200 shipped to you.

[ image disabled ]
[ image disabled ]
[ image disabled ]
[ image disabled ]
[ image disabled ]
[ image disabled ]
[ image disabled ]
[ image disabled ]
[ image disabled ]
[ image disabled ]
[ image disabled ]

That link is worthless to those that are not registered.

[DC Dan MAX USA]

Originally Posted by S14DB

That link is worthless to those that are not registered.

Heres what they are missing....

So here is the progress on the seats, the fiberglass will be black, but can be paint matched to your car as shown below, also carbon and kevlar to follow on later releases - black stretchy material with carbon grey suede cloth cushions, harness frames will be CNC machined aluminum as shown in the CAD drawings but the top frame will have a bend in it also. Price and release date still unconfirmed but were closer than before.

[liv2drift045]

Does the relocation/or sandwhich block (w/e its called), fit defi sensors (oil temp/press)?

I want to order one but I just need to know this first.
Your help is greatly appreciated.

[DC Dan MAX USA]

Originally Posted by 8ggalant

Does the relocation/or sandwhich block (w/e its called), fit defi sensors (oil temp/press)?

I want to order one but I just need to know this first.
Your help is greatly appreciated.

We have oil coolers in stock for $60ea but the hoses and relocation block are out of stock. I'd need to know what the threads were on the defi sensor to answer the question.

[liv2drift045]

Originally Posted by DC Dan MAX USA

We have oil coolers in stock for $60ea but the hoses and relocation block are out of stock. I'd need to know what the threads were on the defi sensor to answer the question.

i'll have to find out because i have no idea haha

[Slidin240Wayz]

How do you install the hydro e-brake?

I know the unit itself is offered.

How do you run the lines?

How do you mount the unit?

Also,

What is the bore size?

Carlos

[DC Dan MAX USA]

Originally Posted by Slidin240Wayz

How do you install the hydro e-brake?

I know the unit itself is offered.

How do you run the lines?

How do you mount the unit?

Also,

What is the bore size?

Carlos

The top port on the hand brake goes to the OEM master cylinder's rear brake output, the end port of handbrake goes to the hard line that used to screw into the OEM master.

Tack weld a reinforcement plate of 1/8" steel to the tranny tunnel, and weld or bolt the hydro brake box to that.
This method is really strong so it does not wiggle and flex like other brakes.


3/4 bore.

[kafanylovesme]

Those seats look badass man. Can't wait for them to come out so I can pick one up. I'll hold off on buying a seat just to get this. Can't wait!!

[DC Dan MAX USA]

Thanks, we will probably offer colored cushions to customize, it's just too easy because they just pop right in place with the velcro on the back. (but the grey and black will be standard)

We have alot of really cool stuff coming out next year, we're so excited.
Rumer has it to include:

Hydro Hand brake
Bucket seat
An even lower spec RUCA and Toe Rod
Turbo back exhaust cobra
Super angle steering knuckles

[Slidin240Wayz]

Thank you for the pictures.

I see two cables going in and only one by the e-brake handle.

Where does the other one go to?

How do you bleed the brake sytem with this unit?

Carlos

[DC Dan MAX USA]

You're welcome.
You can see one fitting is on the end of the master going left with a 90 degree fitting and one is on top with a 90 degree fitting.
"The top port on the hand brake goes to the OEM master cylinder's rear brake output, the end port of handbrake goes to the hard line that used to screw into the OEM master."
The bleed is the same process as if you replaced your brake lines only there is more air because of the cavity inside the handbrake's master. You'll need two cans of fluid and you'll probably bleed everything twice to get all the air out.

[slideways2004]

on the hydro e-brake, while bleeding, do you "pump" the ebrake also or just the brake pedal/calipers??

[DC Dan MAX USA]

Originally Posted by slideways2004

on the hydro e-brake, while bleeding, do you "pump" the ebrake also or just the brake pedal/calipers??

I give it a few pulls but I mostly just use the pedal.

When I do pull the handbrake, I let the foot brake go to the floor and then I pull the handle. The combo moves an awful lot of fluid.

[smokins14]

On the seats, is there going to be a logo on the headrest??? I hope not.

[S13Boosts]

wow nice products love the roller!

[DC Dan MAX USA]

Originally Posted by smokins14

On the seats, is there going to be a logo on the headrest??? I hope not.

Youre not the first to express that opinion, I'll see what I can do.

[kafanylovesme]

I saw a seat on your site and I think it looks pretty cool with that MAX logo. But, whatever you guys decide is best. Any clue when they'll come out? Just to know how long I have to be excited for

[DC Dan MAX USA]

I dont know when yet. I do know there is progress being made.

[drftwerks]

oil coolers in stock???

how much for 2 shipped to 95129

thx