bent subframe and brake lines!

[brndck]

Originally Posted by projectRDM

The subframe doesn't bend easily, but you can break a mounting staunch off where the Aarm mounts pretty easily.

one of the first times i went "drifting" i slid hard into a curb and bent the toe rod, lca, and mounting point on the subframe. it was a royal pita to replace the whole subframe, but i found one used from a junkyard for $125 with all the stock rear arms still attached, and then it took about 8 hours to do (i did it on jackstands and it was effing miserable)