Quote:
Originally Posted by DALAZ_68
yeah see im looking at my stock o2 and its location is on th estock elbow...i was thinkin buyin an aftermarket bung and having it welded a bit lower from the other bung for the stock o2 hole
|
I have ran mine there for a few months. its been fine. you can also get a O2 extender bung from innovate which allows you to run it closer. or i have even seen guys buy spark plug nonfoulers from autozone and drill it out and use it to space out O2s, but thats mostly for OBD2 tricks. you can probably get a shop to weld one in for you for under 40$. i know i have done a ton of them, i normally charge 35 for downpipes that are off. it only takes like 5mins to drill the hole out and weld it up.
12-17-2008, 11:30 PM
Threaded Mode