Lets See Some Light: The Definitive Lighting Thread

[Mister.E]

silviaks2nr,

have you ever done a LHD projector retrofit into the JDM zenki headlamps?

[silviaks2nr]

I've never done a retro in jdm housings but it should be the same as any other projector retrofit in a reflector housing. The mounting/adjustment points may change slightly from USDM housings I imagine.

[Mister.E]

word. when funds allow, i will be contacting you. that wont be for quite some time though.

[jamg]

Originally Posted by RedBullRioter

I got these awhile ago and haven't gotten around to installing them yet. they have a halo although its not hooked up in these photos. I'm going to split the wires on the front turn signals and run them to the halos.

S13 240sx Popup HID Light Conversion Bi Xenon Projector | eBay
Gladman Performance HID conversion - YouTube

Attachment 53240

Close up pic of the projectors.

Attachment 53241

Comes with arms that are shortened to the right length.

Attachment 53242

Highbeams

Attachment 53243

I would like to run the pbm hmic which would require relocating the motor for the flip ups and fabricating new arms like this.

HOW TO: Keep your 180sx pop up headlights with the Part Shop Max Intercooler Kit. 180sx RS13 - YouTube

Also I'm a bit worried about debris breaking the lens. I've been told to make wire mesh and a couple of other weird ideas. The only thing I can think of is retrofitting some casing around the hid but I'm not sure that casing will withstand the heat and you don't want to have vents let moisture in.

that guy wanted $200 for just brackets and arms alone...

i need a retrofit h4, i figured i'd use those brackets.

anyone want to make some for me lol

[rat240]

06 mazda5 tail lights

[Spark]

My retrofit











Bixenon projectors 5000k
ebay clear headligts

Dont have good night photos, but light is much-much=) better then stock.
like 80% better=) couse stock headligts suck

[rat240]

Finished these yesterday

[Driftpretty]

If anyone wants some projectors from a kouki s14 let me know! i was gonna do something cool with them. but changed my mind.. pm me!

[soryu]

anyone got shots of other s13 headlights? bricks, projectors, cibie, stock, ebay
here's hella's with nightbreakers

The lights are pointed toward the center here.
I adjusted them later pointing forward

[40craz]

Ho hard was it to retrofit the hids into the s13 headlight?

[240sxDavid]

Not sure if im retarded or what the deal is, but I have these s13 bosch foglights I just bought aaaand I cant take off this H3 bulb uploadfromtaptalk1373438775710.jpg

[soryu]

That doesn't come off.
That's how they are.

[240sxDavid]

Thank you soryu, how do I replace it?

Sent from my SGH-M919 using Tapatalk 4 Beta

[soryu]

Just buy new bulbsand that's it.
Bulbs come with that metal piece attached.

[240sxDavid]

Found em Thanks, have any of you guys modified type x foglights in any way? Tint/vinyl/led

[Andres_G]

Originally Posted by 240sxDavid

Not sure if im retarded or what the deal is, but I have these s13 bosch foglights I just bought aaaand I cant take off this H3 bulb Attachment 57504

That's an H3C bulb.

I asked this same question in 2010

What bulb is this?

Also, check this out:

Lexus LS400: How to Convert H3 Bulbs into H3C Bulbs

[240sxDavid]

Makes sense, ill take that into consideration, Thank you

[driver11324]

Just finished up my X5M retrofit into the JDM kouki headlights. Wired up the bixenon solenoid and using the old high beam housings as fog lights.

[soryu]

^^Cutoff pics?

[tapdeznutz]

2nd that, i want to see the lighting in front of the car, see how bright it is. it does look very nice though. i still need to post up my s13 pop ups. hope to have them done this weekend.

[driver11324]

Originally Posted by soryu

^^Cutoff pics?

Not the best pic but the lights are BRIGHT!

[silviaks2nr]

not my work

[silviaks2nr]

bump.

refinished/candied some more kouki tails. I did an HID/ quad projector retrofit on this car as well.

[Andres_G]

Nice! But for my taste, I think the orange would have looked better. Any photoshoppers in here?

[new2sr20]

the candied/refinished tails look great. Kudos sir. Care to share what clear you used? and has the factory black been repainted with black again?

[S T Y L E S]

Let's see more lights!!

[silviaks2nr]

Not a nissan but...

2008 highlander
oem rx350 bixenon projectors modded with clear lenses
blue chrome bezels







I'll get some pcitures of the s14 quad retro I just did soon.

Originally Posted by future

The minis blow to be honest

its all cheap overseas junk. i didnt even want to post in this stupid thread, but i figure i would post a screen cap of the typical junk mail i get on the day to day from stupid vendors overseas who think i want to sell cheap shit. apparently, now there is an ULTIMATE version of the mini... 100% increased light output. really! ONE HUNDRED PERCENT! i wonder where they get their facts and claims from. I mean, if the previous version was so good, imagine how good this one is... 100% better! its a win-win situation. and for us vendors, buy 100 and get 20 free. i mean, they're just giving this shit away. lucky!

Originally Posted by tapdeznutz

dang silviaks2nr, wish i knew about the d2H style bulbs before i blew a few bucks on used d2s/r's

d2h ISNT a real bulb, it does not exist. however, companies overseas are quick to assign names to an inferior/flawed product. so, thats that... let there be a d2h bulb.

just like there is no such thing as a xenon bulb for halogen enclosures (h1, h4, etc). but if you search ebay, you'll find plenty of illegal, non-compliant, flawed junk online...

its all CHEAP SHIT, no different than the godspeed intake manifolds

[Trap Star]

Anyone know where I could find a set of stock s13 triple projector headlight covers? The PO of my headlights decided to replace the factory ones with clear ones and I'm thinking thats why my headlights are pretty much worthless from a functional standpoint. Right now they only cast a little bit of light about 5ft. Shits weak.

^^

i guess not all people understand how projectors work

wtf