Wheel Fitment Question Thread

[Irresistible]

18x10+9 front, 18x11+9 rear. Doable on S14 with stock metal? Front seems really possible, but idk about rear.

[InsTanCeZ]

Originally Posted by Irresistible

18x10+9 front, 18x11+9 rear. Doable on S14 with stock metal? Front seems really possible, but idk about rear.

The rear could be doable with 235/40r18 tires and about 7 degrees of camber (ridiculous). Or you would need a big ass pull in the rear if you wanted normal tires/camber, which may require a body shop unless you have experience.

[KravingAKouki]

Would an 18x9 +15 squared setup for an s14 require any roll or pull of fenders if I were to have it flush with the metal? No tucking. If not, what sizes would work without having to roll and pull? Going to be buying FA 500, or stance coils if that matters. Preferred not to have spacers also. Thanks for the help guys

[KravingAKouki]

Originally Posted by KravingAKouki

Would an 18x9 +15 squared setup for an s14 require any roll or pull of fenders if I were to have it flush with the metal? No tucking. If not, what sizes would work without having to roll and pull? Going to be buying FA 500, or stance coils if that matters. Preferred not to have spacers also. Thanks for the help guys

Anybody? Would a +15 be enough or would I need more positive offset like +18?

[lflkajfj12123]

Originally Posted by Irresistible

18x10+9 front, 18x11+9 rear. Doable on S14 with stock metal? Front seems really possible, but idk about rear.

I have 18x10.5 +21 in the rear with 15 mm spacers and about -6.5 to -7 degrees of camber on stock metal... i can barely slide a credit card through the rim and fender but it works... biggest issue for me was hitting the coilover but low offset should be ok

225/40 s drives i think could be 215 tho

[dudermagee]

Originally Posted by Irresistible

18x10+9 front, 18x11+9 rear. Doable on S14 with stock metal? Front seems really possible, but idk about rear.

Yes.

Front is 18x10 +9 with 235/35 tires and -2.4 camber
rear is 18x11 +9 with 255/35 tires and -4 camber
Stock fenders, with a roll and pull.

[da_crew10]

Originally Posted by nismobenzo

looks like crap vince
i miss your old cars! haha


anything wider and widebody is pretty much a must
love a clean aggressive stock body that hasnt been pulled to SH*T

My man Benzo!

Originally Posted by dudermagee

Yes.

Front is 18x10 +9 with 235/35 tires and -2.4 camber
rear is 18x11 +9 with 255/35 tires and -4 camber
Stock fenders, with a roll and pull.

Those are 35's? Look like 40's from that angle.

[tauntdevil]

Originally Posted by dudermagee

Yes.

Front is 18x10 +9 with 235/35 tires and -2.4 camber
rear is 18x11 +9 with 255/35 tires and -4 camber
Stock fenders, with a roll and pull.

This somewhat answers my question, thanks for posting response & picture. Helps me do the math easier.