1UZFE into S-Chassis

[914Slide]

Originally Posted by ingmar F

I have my engine wired in the stock harness. Its not that difficult, it starts with the key. The only thing left to do is the speedo and tacho

Bare with me guys i feel like im close. Should i wire in at the brown/white plug near the ecu for ing on,tach,water,and speed? and take the acc power witch would be the switched for the coils, injector and sensor powers from near the key, I think its one of the thicker gauge wires (blue,Red/white,yellowblk). Then the start and fuel is easy.