Clutchswap WHAT THE FUCK - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Fries · 06-23-2009, 05:01 PM

I'm in the process of doing a 5 speed swap.

Removed the AUTO pilot bearing.

Took the 5speed pilot bearing off of the supplied clutch alignment tool [Exedy OEM]

Put the pilot bearing into the crank, using a socket and a rubber mallet to get that shit in there.

Put my clutch disk on my alignment tool and it wouldnt fit into the pilot bearing.

I assumed it should be a little tough, I gave teh alignment tool a few smacks with a hammer and it was good. Put clutch cover on. Tightened to specs and did the bolts in the proper order.

Alignment tool will not fucking come out. Im not a small guy and I cannot pull this muther fucker out.

Thoughts?

06-23-2009, 05:01 PM	#1
Fries Zilvia FREAK! Join Date: May 2007 Location: Texas/or/Afghanistan Age: 37 Posts: 1,514 Trader Rating: (3) Feedback Score: 3 reviews	Clutchswap WHAT THE FUCK I'm in the process of doing a 5 speed swap. Removed the AUTO pilot bearing. Took the 5speed pilot bearing off of the supplied clutch alignment tool [Exedy OEM] Put the pilot bearing into the crank, using a socket and a rubber mallet to get that shit in there. Put my clutch disk on my alignment tool and it wouldnt fit into the pilot bearing. I assumed it should be a little tough, I gave teh alignment tool a few smacks with a hammer and it was good. Put clutch cover on. Tightened to specs and did the bolts in the proper order. Alignment tool will not fucking come out. Im not a small guy and I cannot pull this muther fucker out. Thoughts? __________________